On 10/25/18 10:00 AM, Warner Losh wrote:
I suspect you can just lose those hints in the hints file and be fine. The
uart should attach via acpi. The keyboard won't, however, since it isn't
enabled. Can you try removing these lines from your hints file and see if
the problem persists? Note this is for debugging purposes only.
hint.atkbdc.0.at="isa"
hint.uart.0.at="isa"
That seems to work. After also removing uart1 from the hints file, I get:
uart0: <16x50 with 256 byte FIFO> iomem
0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0
uart1: <16x50 with 256 byte FIFO> iomem
0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0
uart2: <16x50 with 256 byte FIFO> iomem
0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0
uart3: <16x50 with 256 byte FIFO> iomem
0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0
--
Rebecca
_______________________________________________
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
