On 20.09.20 22:35, Rainer Hurling wrote: > On 20.09.20 22:07, Konstantin Belousov wrote: >> On Sun, Sep 20, 2020 at 10:55:26PM +0300, Konstantin Belousov wrote: >>> On Sun, Sep 20, 2020 at 03:11:26PM +0200, Rainer Hurling wrote: >>>> Am 20.09.20 um 11:38 schrieb Konstantin Belousov: >>>>> On Sun, Sep 20, 2020 at 10:26:11AM +0200, Rainer Hurling wrote: >>>>>> Am 20.09.20 um 10:20 schrieb Hans Petter Selasky: >>>>>>> On 2020-09-20 10:05, Rainer Hurling wrote: >>>>>>>> Hi monochrome, >>>>>>>> >>>>>>>> back to keyboard, it tried newest CURRENT (r365920) on my box and even >>>>>>>> with newest sources the error occurs. >>>>>>>> >>>>>>>> After looking around somewhat more, I found some hints about Virtualbox >>>>>>>> kernel module having problems with r365488. Unfortunately, I am not >>>>>>>> able >>>>>>>> to find the thread again :( >>>>>>>> >>>>>>>> What seems to help as a workaround is to disable the loading of >>>>>>>> VirtualBox in /boot/loader.conf >>>>>>>> >>>>>>>> #vboxdrv_load="YES" >>>>>>>> >>>>>>>> and in /etc/rc.conf >>>>>>>> >>>>>>>> #vboxnet_enable="YES" >>>>>>>> #vboxguest_enable="YES" >>>>>>>> >>>>>>>> >>>>>>>> So probably, this page fault is not restricted to AMD Ryzen? >>>>>>>> >>>>>>> >>>>>>> Possibly you need to rebuild that kernel module. Maybe the FreeBSD >>>>>>> version was not bumped correctly. >>>>>>> >>>>>>> --HPS >>>>>>> >>>>>> >>>>>> Thanks for the hint. But I did rebuild all kernel modules before >>>>>> rebooting, in my case vbox*.ko, nvidia*.ko. >>>>> >>>>> Provide backtrace of the panic. >>>>> >>>> >>>> Hi Konstantin, >>>> >>>> Thanks for your response. >>>> >>>> After trying several ways to produce a core dump or a working kdb prompt >>>> without success, all I can offer is the following screen contents. I >>>> built a GENERIC kernel with debugging enabled, enable loading of vboxdrv >>>> via /boot/loader.conf and /etc/rc.conf as described above: >>>> >>>> >>>> [..snip..] >>>> procfs registered >>>> modulte_register_init: MOD_LOAD (tmpfs, 0xffffffff80caa060, >>>> 0xffffffff82520a70) error 17 >>>> Timecounters tick every 1.000 msec >>>> lo0: bpf attached >>>> vlan: initialized, using hash tables with chaining >>>> >>>> >>>> Fatal trap 12: page fault while in kernel mode >>>> cpuid = 31; apic id = 1f >>>> fault virtual address = 0x0 >>>> fault code = supervisor read data, page not present >>>> instruction pointer = 0x20:0xffffffff80ea889b >>>> stack pointer = 0x20:0xffffffff826017e0 >>>> frame pointer = 0x20:0xffffffff826017e0 >>>> code segment = base 0x0, limit 0xfffff, type 0x1b >>>> = DPL 0, pres 1, long 1, def32 0, gran 1 >>>> processor eflags = interrupt enabled, resume, IOPL = 0 >>>> current process = 0 (swapper) >>>> trap number = 12 >>>> panic: page fault >>>> cpuid = 31 >>>> time = 1 >>>> KDB: stack backtrace: >>>> db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame >>>> 0xffffffff82601490 >>>> vpanic() at vpanic+0x182/frame 0xffffffff826014e0 >>>> panic() at panic+0x43/frame 0xffffffff82601540 >>>> trap_fatal() at trap_fatal+0x387/frame 0xffffffff826015a0 >>>> trap_pfault() at trap_pfault+0x97/frame 0xffffffff82601600 >>>> calltrap() at calltrap+0x8/frame 0xffffffff82601710 >>>> --- trap 0xc, rip = 0xffffffff80ea889b, rsp = 0xffffffff826017e0, rbp = >>>> 0xffffffff826017e0 --- >>>> phys_pager_getpages() at phys_pager_getpages+0xb/frame 0xffffffff826017e0 >>>> vm_pager_get_pages() at vm_pager_get_pages+0x4f/frame 0xffffffff82601830 >>>> vm_fault() at vm_fault+0x5d6/frame 0xffffffff82601940 >>>> vm_map_wire_locked() at vm_map_wire_locked+0x3a6/framw 0xffffffff826019f0 >>>> vm_map_wire() at vm_map_wire+0x6b/frame 0xffffffff82601a20 >>>> rtR0MemObjFreeBSDAllocHelper() at >>>> rtR0MemObjFreeBSDAllocHelper+0xdc/frame 0xffffffff82601a70 >>>> rtR0MemObjNativeAllocCont() at rtR0MemObjNativeAllocCont+0x50/frame >>>> 0xffffffff82601ac0 >>>> supdrvGipCreate() at supdrvGipCreate+0x97/frame 0xffffffff82601b60 >>>> supdrvInitDevExt() at supdrvInitDevExt+0x19a/frame 0xffffffff82601bd0 >>>> VBoxDrvFreeBSDModuleEvent() at VBoxDrvFreeBSDModuleEvent+0x46/frame >>>> 0xffffffff82601bf0 >>>> module_register_init() at module_register_init+0xbd/frame >>>> 0xffffffff82601c20 >>>> mi_startup() at mi_startup+0xec/frame 0xffffffff82601c70 >>>> btext() at btext+0x2c >>>> KDB: enter: panic >>>> [ thread pid 0 tid 100000 ] >>>> Stopped at kdb_enter+0x37: movq $0,0x10b5796(%rip9 >>>> db> >>>> >>>> >>>> The system freezes at this point, no core dump is generated ;) This >>>> does not happen without loading VBoxDrv. >>>> >>>> At least, the screen dump shows VBoxDrvFreeBSDModuleEvent(). I hope, >>>> this is of some help. >>>> >>> Yes it seems to be enough for me to see where the possible issue is. >>> Try this patch, I did not even compiled it. Probably you need to put >>> it into ports/emulators/virtualbox-ose-kmod/files with the name ending >>> with .patch. >> This seems to be wrong, name should _start_ with the prefix 'patch-'. > > Many thanks for the patch! > > Putting it into emulators/virtualbox-ose-kmod/files/ as > patch-src_VBox_Runtime_r0drv_freebsd_memobj-r0drv-freebsd.c does not > patch the sources, probably because emobj-r0drv-freebsd.c was already > patched from the main port (virtualbox-ose). > > Patching manually, build and install the kernel module seems to work fine. > > Unfortunaly, after rebooting the same page fault occurs :( > > >>> >>> --- src/VBox/Runtime/r0drv/freebsd/memobj-r0drv-freebsd.c.xxx >>> 2020-09-20 19:40:07.471956776 +0000 >>> +++ src/VBox/Runtime/r0drv/freebsd/memobj-r0drv-freebsd.c 2020-09-20 >>> 19:46:03.606966773 +0000 >>> @@ -323,7 +323,8 @@ >>> size_t cPages = atop(pMemFreeBSD->Core.cb); >>> int rc; >>> >>> - pMemFreeBSD->pObject = vm_object_allocate(OBJT_PHYS, cPages); >>> + pMemFreeBSD->pObject = vm_pager_allocate(OBJT_PHYS, NULL, >>> + pMemFreeBSD->Core.cb, VM_PROT_ALL, 0, curthread->td_ucred); >>> >>> /* No additional object reference for auto-deallocation upon >>> unmapping. */ >>> #if __FreeBSD_version >= 1000055 >>> @@ -457,7 +458,8 @@ >>> return VERR_NO_MEMORY; >>> } >>> >>> - pMemFreeBSD->pObject = vm_object_allocate(OBJT_PHYS, atop(cb)); >>> + pMemFreeBSD->pObject = vm_pager_allocate(OBJT_PHYS, NULL, cb, >>> VM_PROT_ALL, >>> + 0, curthread->td_ucred); >>> >>> if (PhysHighest != NIL_RTHCPHYS) >>> VmPhysAddrHigh = PhysHighest; >>> I tried a second time with the changes of your patch. This time, I patched files/patch-src_VBox_Runtime_r0drv_freebsd_memobj-r0drv-freebsd.c in emulators/virtualbox-ose (the main port).
After rebuilding virtualbox-ose-kmod and virtualbox-ose and rebooting, I got some more info (lines at the beginning, numbered #6 to #13; lines #1 to #5 are outside of the frozen screen) and afterwards slightly different messages: [..snip..] #6 0xffffffff8255f756 at rtR0MemObjFreeBSDAllocHelper+0x96 #7 0xffffffff8255f8e0 at rtR0MemObjNativeAllocCont+0x50 #8 0xffffffff8253c7b7 at supdrvGipCreate+0x97 #9 0xffffffff8253519a at supdrvInitDevExt+0x19a #10 0xffffffff825450f6 at VBoxDrvFreeBSDModuleEvent+0x46 #11 0xffffffff80bb41fd at module_register_init+0xbd #12 0xffffffff80b6985c at mi_startup+0xec #13 0xffffffff8037002c at btext+0x2c Fatal trap 12: page fault while in kernel mode cpuid = 31; apic id = 1f fault virtual address = 0x25407efa fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80ec0b63 stack pointer = 0x28:0xffffffff826018b0 frame pointer = 0x28:0xffffffff82601940 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) trap number = 12 panic: page fault cpuid = 31 time = 1 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff82601560 vpanic() at vpanic+0x182/frame 0xffffffff826015b0 panic() at panic+0x43/frame 0xffffffff82601610 trap_fatal() at trap_fatal+0x387/frame 0xffffffff82601670 trap_pfault() at trap_pfault+0x97/frame 0xffffffff826016d0 trap() at trap+0x2ab/frame 0xffffffff826017e0 calltrap() at calltrap+0x8/frame 0xffffffff826017e0 --- trap 0xc, rip = 0xffffffff80ec0b63, rsp = 0xffffffff826018b0, rbp = 0xffffffff82601940 --- vm_map_insert() at vm_map_insert+0x2f3/framw 0xffffffff82601940 vm_map_find() at vm_map_find+0x4a4/frame 0xffffffff82601a00 rtR0MemObjFreeBSDAllocHelper() at rtR0MemObjFreeBSDAllocHelper+0x96/frame 0xffffffff82601a70 rtR0MemObjNativeAllocCont() at rtR0MemObjNativeAllocCont+0x50/frame 0xffffffff82601ac0 supdrvGipCreate() at supdrvGipCreate+0x97/frame 0xffffffff82601b60 supdrvInitDevExt() at supdrvInitDevExt+0x19a/frame 0xffffffff82601bd0 VBoxDrvFreeBSDModuleEvent() at VBoxDrvFreeBSDModuleEvent+0x46/frame 0xffffffff82601bf0 module_register_init() at module_register_init+0xbd/frame 0xffffffff82601c20 mi_startup() at mi_startup+0xec/frame 0xffffffff82601c70 btext() at btext+0x2c KDB: enter: panic [ thread pid 0 tid 100000 ] Stopped at kdb_enter+0x37: movq $0,0x10b5616(%rip) db> Perhaps this gives some more insight into the problem? I can't assess, sorry. _______________________________________________ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"