On 06/18/2022 8:30 am, Michael Gmelin wrote:
On 18. Jun 2022, at 15:10, Larry Rosenman <l...@lerctr.org> wrote:
On 06/18/2022 3:54 am, Michael Gmelin wrote:
[SNIP]
Subvendor is Fujitsu Siemens - so I guess this is integrated into a
system by them.
Seems like flashing the 2108 to an IT firmware isn't an option (based
on what I found online). You could check if there are firmware updates
available though. How did you configure the drives in the megaraid
utility (ctrl-h after boot)? Did you create a RAID-0 for each disk?
And what capacity is shown in there?
Based on [0], 2108 based controllers don't support 4kn. IT mode would
help (true passthrough), but as written above, I don't think it's an
option for this model.
-m
[0] https://bitdeals.tech/blogs/news/4kn-lsi-compatibility-list
as I said earlier in the thread, I've bought 2 of these:
https://www.ebay.com/itm/194910024856
which if I'm reading that chart right should work with the 4Kn drives.
That certainly sounds promising.
Best
Michael
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 214-642-9640 E-Mail: l...@lerctr.org
US Mail: 5708 Sabbia Dr, Round Rock, TX 78665-2106
And I realized I didn't answer the question about how stuff was
configured, each disk is Raid0. the current
pool is 10x3T disks, and I'm adding 6x8T since the pool is 70% full
(bacula backups, Time Machine Backups, random other stuff).
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 214-642-9640 E-Mail: l...@lerctr.org
US Mail: 5708 Sabbia Dr, Round Rock, TX 78665-2106
