I've got a BTC 24x ATAPI CDROM driver, and I can't mount it. Attached is
my dmesg.out. Typing mount /cdrom causes the mount command to hang, and
it never did this before. Also, I'm getting these strange syslog
messages. (See attached file messages.out.) I tried disabling DMA for
ATAPI devices in my kernel config file to no avail.
- Donn
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Sat Aug 12 23:49:53 EDT 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/CUSTOM
Calibrating clock(s) ... TSC clock: 166445743 Hz, i8254 clock: 1193164 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 166449756 Hz
CPU: Pentium/P55C (166.45-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 62914560 (61440K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00396000 - 0x03bf7fff, 59121664 bytes (14434 pages)
avail memory = 57749504 (56396K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f9a00
bios32: Entry = 0xf04b0 (c00f04b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x4e0
pnpbios: Found PnP BIOS data at 0xc00fd020
pnpbios: Entry = f0000:d050 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc037d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc037d0a8.
Intel Pentium detected, installing workaround for F00F bug
nulldev: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Creating DISK md0
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 46855964 bytes/sec
bzero() bandwidth = 24535662 bytes/sec
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1039, dev=0x5597, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1039, dev=0x0008, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1039, dev=0x5513, revid=0xd0
class=01-01-8a, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 4, range 32, base 0000e400, size 3, enabled
map[14]: type 4, range 32, base 0000e000, size 2, enabled
map[18]: type 4, range 32, base 0000d800, size 3, enabled
map[1c]: type 4, range 32, base 0000d400, size 2, enabled
map[20]: type 4, range 32, base 0000d000, size 4, enabled
found-> vendor=0x10ec, dev=0x8029, revid=0x00
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 4, range 32, base 0000b800, size 5, enabled
found-> vendor=0x1039, dev=0x0200, revid=0x65
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 3, range 32, base e7800000, size 22, enabled
map[14]: type 1, range 32, base e6000000, size 16, enabled
map[18]: type 4, range 32, base 0000b400, size 7, enabled
pci0: <PCI bus> on pcib0
pci0: <Host to PCI bridge (vendor=1039 device=5597)> (vendor=0x1039, dev=0x5597) at
0.0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5591 ATA33 controller> port
0xd000-0xd00f,0xd400-0xd403,0xd800-0xd807,0xe000-0xe003,0xe400-0xe407 irq 11 at device
1.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000
ata0: mask=03 status0=50 status1=50
ata0: mask=03 status0=50 status1=50
ata0: devices = 0x3
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008
ata1: mask=03 status0=50 status1=51
ata1: mask=03 status0=10 status1=00
ata1: devices = 0x4
ata1: at 0x170 irq 15 on atapci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xb800-0xb81f irq 10 at device 10.0 on
pci0
bpf: ed0 attached
ed0: address 00:c0:df:ed:0b:17, type NE2000 (16 bit)
pci0: <SiS 5597/98 SVGA controller> (vendor=0x1039, dev=0x0200) at 19.0 irq 11
Trying Read_Port at 203
ESS0000: adding io range 0x800-0xfff, size=0x8, align=0x8
ESS1868: start dependant
ESS1868: adding dma mask 0x2
ESS1868: adding dma mask 0x9
ESS1868: adding irq mask 0x20
ESS1868: adding fixed io range 0x220-0x22f, size=0x10, align=0x1
ESS1868: adding fixed io range 0x388-0x38b, size=0x4, align=0x1
ESS1868: adding fixed io range 0x330-0x331, size=0x2, align=0x1
ESS1868: start dependant
ESS1868: adding dma mask 0x2
ESS1868: adding dma mask 0x9
ESS1868: adding irq mask 0x6a0
ESS1868: adding io range 0x220-0x24f, size=0x10, align=0x20
ESS1868: adding fixed io range 0x388-0x38b, size=0x4, align=0x1
ESS1868: adding io range 0x300-0x331, size=0x2, align=0x30
ESS1868: start dependant
ESS1868: adding dma mask 0xb
ESS1868: adding dma mask 0xb
ESS1868: adding irq mask 0x1ea0
ESS1868: adding io range 0x220-0x28f, size=0x10, align=0x20
ESS1868: adding fixed io range 0x388-0x38b, size=0x4, align=0x1
ESS1868: adding io range 0x300-0x331, size=0x2, align=0x30
ESS1868: start dependant
ESS1868: adding dma mask 0xb
ESS1868: adding dma mask 0xb
ESS1868: adding irq mask 0x1ea0
ESS1868: adding io range 0x220-0x28f, size=0x10, align=0x20
ESS1868: adding fixed io range 0x388-0x38b, size=0x4, align=0x1
ESS1868: adding io range 0x800-0xfff, size=0x2, align=0x2
ESS1868: start dependant
ESS1868: adding dma mask 0xb
ESS1868: adding dma mask 0xb
ESS1868: adding irq mask 0x1ea0
ESS1868: adding io range 0x220-0x28f, size=0x10, align=0x20
ESS1868: adding io range 0x800-0xfff, size=0x4, align=0x4
ESS1868: adding io range 0x800-0xfff, size=0x2, align=0x2
ESS1868: end dependant
ESS0001: start dependant
ESS0001: adding fixed io range 0x201-0x201, size=0x1, align=0x1
ESS0001: start dependant
ESS0001: adding io range 0x200-0x20f, size=0x1, align=0x1
ESS0001: end dependant
pnpbios: 14 devices, largest 110 bytes
PNP0401: adding dma mask 0x8
PNP0401: adding irq mask 0x80
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0
PNP0401: end config
pnpbios: handle 1 device ID PNP0401 (0104d041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 2 device ID PNP0501 (0105d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 3 device ID PNP0501 (0105d041)
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: end config
pnpbios: handle 4 device ID PNP0700 (0007d041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x3bfffff, size=0x3b00000
PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xffee0000-0xffefffff, size=0x20000
PNP0c01: end config
pnpbios: handle 6 device ID PNP0c01 (010cd041)
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 7 device ID PNP0000 (0000d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 8 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: end config
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 10 device ID PNP0303 (0303d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0
PNP0c04: end config
pnpbios: handle 11 device ID PNP0c04 (040cd041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x80-0x90, size=0x11, align=0
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0
PNP0200: end config
pnpbios: handle 12 device ID PNP0200 (0002d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 13 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: end config
pnpbios: handle 14 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0xec00-0xec3f, size=0x40, align=0
PNP0c02: end config
pnpbios: handle 15 device ID PNP0c02 (020cd041)
sc-: sc0 exists, using next available unit number
vga-: vga0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 07 80 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 00 00 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 9f
bf 1f 00 4f 0d 0e 00 00 00 00 9b 8d 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
sio0: not probed (disabled)
sio1: not probed (disabled)
sio2: irq maps: 0x21 0x39 0x29 0x21
sio2 at port 0x3e8-0x3ef irq 4 on isa0
sio2: type 16550A
sio3: not probed (disabled)
mse0: <Bus/InPort Mouse> at port 0x23c-0x23f irq 3 on isa0
sbc0 failed to probe at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <ESS ES1868 Plug and Play AudioDrive> failed to probe at port 0x800-0x807 on
isa0
sbc1: <ESS ES1868> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
pcm0: <ESS 18xx DSP> on sbc1
pcm0: ESS1868 detected
pcm: setmap 7000, 1000; 0xc5249000 -> 7000
pcm: setmap 8000, 1000; 0xc524a000 -> 8000
unknown: <ESS ES1868 Plug and Play AudioDrive> failed to probe at port 0x201 on isa0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff irq 4 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2f8-0x2ff irq 3 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
BIOS Geometries:
0:030f7f3f 0..783=784 cylinders, 0..127=128 heads, 1..63=63 sectors
1:020e3f3f 0..526=527 cylinders, 0..63=64 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
new masks: bio 68c040, tty 6300ba, net 6704ba
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
Linux-ELF exec handler installed
ata0-master: success setting up UDMA2 mode on SiS chip
ad0: <FUJITSU MPB3032ATU/2009> ATA-3 disk at ata0 as master
ad0: 3093MB (6335280 sectors), 6704 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
Creating DISK ad0
ata0-slave: success setting up WDMA2 mode on SiS chip
ad1: <M1614TA/8D-44-21> ATA-0 disk at ata0 as slave
ad1: 1040MB (2130912 sectors), 2114 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 1 secs/int, 1 depth queue, WDMA2
ad1: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting up PIO4 mode on generic chip
acd0: <BCD-24X 1997-06-27/VER 2.0> CDROM drive at ata1 as master
acd0: read 515KB/s (1718KB/s), 128KB buffer, PIO4
acd0: Reads: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 266111, size 266049 : OK
ad0s2: type 0xa5, start 266112, end = 532223, size 266112 : OK
ad0s3: type 0xa5, start 532224, end = 6330239, size 5798016 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
ad1s1: type 0xa5, start 63, end = 2128895, size 2128833 : OK
ad1s1: type 0xa5, start 63, end = 2128895, size 2128833 : OK
arp: 00:00:ca:0d:45:2c is using my IP address 0.0.0.0!
arp: 00:00:ca:0f:20:02 is using my IP address 0.0.0.0!
arp: 00:00:ca:0f:20:02 is using my IP address 0.0.0.0!
arp: 00:00:ca:0d:45:2c is using my IP address 0.0.0.0!
arp: 00:00:ca:06:21:18 is using my IP address 0.0.0.0!
arp: 00:00:ca:06:21:18 is using my IP address 0.0.0.0!
arp: 00:00:ca:0d:45:2c is using my IP address 0.0.0.0!
arp: 00:00:ca:0f:20:02 is using my IP address 0.0.0.0!
arp: 00:00:ca:06:21:18 is using my IP address 0.0.0.0!
arp: 00:00:ca:0d:45:2c is using my IP address 0.0.0.0!
arp: 00:00:ca:06:21:18 is using my IP address 0.0.0.0!
arp: 00:00:ca:0f:20:02 is using my IP address 0.0.0.0!
splash: image decoder found: green_saver
acd0: READ_CD command timeout - resetting
ata1: resetting devices .. ata1: mask=01 status0=10 status1=00
ata1-master: timeout waiting for command=ef s=90 e=60
ata1-master: failed setting up PIO4 mode on generic chip
ata1-master: using PIO mode set by BIOS
done
ata1-master: timeout waiting to give command=a0 s=90 e=60
acd0: failure to send ATAPI packet command
acd0: failure to execute ATAPI packet command
acd0: READ_CD command timeout - resetting
ata1: resetting devices .. ata1: mask=01 status0=10 status1=00
ata1-master: timeout waiting for command=ef s=90 e=60
ata1-master: failed setting up PIO4 mode on generic chip
ata1-master: using PIO mode set by BIOS
done
ata1-master: timeout waiting to give command=a0 s=90 e=60
acd0: failure to send ATAPI packet command
acd0: failure to execute ATAPI packet command
acd0: READ_CD command timeout - resetting
ata1: resetting devices .. ata1: mask=01 status0=10 status1=00
ata1-master: timeout waiting for command=ef s=90 e=60
ata1-master: failed setting up PIO4 mode on generic chip
ata1-master: using PIO mode set by BIOS
done
ata1-master: timeout waiting to give command=a0 s=90 e=60
acd0: failure to send ATAPI packet command
acd0: failure to execute ATAPI packet command
acd0: READ_CD command timeout - resetting
ata1: resetting devices .. ata1: mask=01 status0=10 status1=00
ata1-master: timeout waiting for command=ef s=90 e=60
ata1-master: failed setting up PIO4 mode on generic chip
ata1-master: using PIO mode set by BIOS
done
Aug 12 23:54:51 /kernel: arp: 00:00:ca:06:21:18 is using my IP address 0.0.0.0!
Aug 12 23:54:51 /kernel: arp: 00:00:ca:0d:45:2c is using my IP address 0.0.0.0!
Aug 12 23:54:51 /kernel: arp: 00:00:ca:06:21:18 is using my IP address 0.0.0.0!
Aug 12 23:54:51 /kernel: arp: 00:00:ca:0f:20:02 is using my IP address 0.0.0.0!
Aug 12 23:54:55 /kernel: splash: image decoder found: green_saver
Aug 12 23:55:17 su: dmmiller to root on /dev/ttyv1
Aug 12 23:56:02 /kernel: acd0: READ_CD command timeout - resetting
Aug 12 23:56:02 /kernel: ata1: resetting devices .. ata1: mask=01 status0=10
status1=00
Aug 12 23:56:02 /kernel: ata1-master: timeout waiting for command=ef s=90 e=60
Aug 12 23:56:02 /kernel: ata1-master: failed setting up PIO4 mode on generic chip
Aug 12 23:56:02 /kernel: ata1-master: using PIO mode set by BIOS
Aug 12 23:56:02 /kernel: done
Aug 12 23:56:02 /kernel: ata1-master: timeout waiting to give command=a0 s=90 e=60
Aug 12 23:56:02 /kernel: acd0: failure to send ATAPI packet command
Aug 12 23:56:02 /kernel: acd0: failure to execute ATAPI packet command
Aug 12 23:56:37 /kernel: acd0: READ_CD command timeout - resetting
Aug 12 23:56:37 /kernel: ata1: resetting devices .. ata1: mask=01 status0=10
status1=00
Aug 12 23:56:37 /kernel: ata1-master: timeout waiting for command=ef s=90 e=60
Aug 12 23:56:37 /kernel: ata1-master: failed setting up PIO4 mode on generic chip
Aug 12 23:56:37 /kernel: ata1-master: using PIO mode set by BIOS
Aug 12 23:56:37 /kernel: done
Aug 12 23:56:37 /kernel: ata1-master: timeout waiting to give command=a0 s=90 e=60
Aug 12 23:56:37 /kernel: acd0: failure to send ATAPI packet command
Aug 12 23:56:37 /kernel: acd0: failure to execute ATAPI packet command
Aug 12 23:57:12 /kernel: acd0: READ_CD command timeout - resetting
Aug 12 23:57:12 /kernel: ata1: resetting devices .. ata1: mask=01 status0=10
status1=00
Aug 12 23:57:12 /kernel: ata1-master: timeout waiting for command=ef s=90 e=60
Aug 12 23:57:12 /kernel: ata1-master: failed setting up PIO4 mode on generic chip
Aug 12 23:57:12 /kernel: ata1-master: using PIO mode set by BIOS
Aug 12 23:57:12 /kernel: done
Aug 12 23:57:12 /kernel: ata1-master: timeout waiting to give command=a0 s=90 e=60
Aug 12 23:57:12 /kernel: acd0: failure to send ATAPI packet command
Aug 12 23:57:12 /kernel: acd0: failure to execute ATAPI packet command
Aug 12 23:57:42 /kernel: acd0: READ_CD command timeout - resetting
Aug 12 23:57:42 /kernel: ata1: resetting devices .. ata1: mask=01 status0=10
status1=00
Aug 12 23:57:42 /kernel: ata1-master: timeout waiting for command=ef s=90 e=60
Aug 12 23:57:42 /kernel: ata1-master: failed setting up PIO4 mode on generic chip
Aug 12 23:57:42 /kernel: ata1-master: using PIO mode set by BIOS
Aug 12 23:57:42 /kernel: done
Aug 13 00:00:00 acs-24-154-25-30 newsyslog[280]: logfile turned over
