After last changes ata DMA support is not workind and atapicd is not
recognized on Toshiba Tecra-8100 (FreeBSD-5.0-CURRENT)

Val

------------

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Tue Oct  3 14:33:01 EDT 2000
    [EMAIL PROTECTED]:/usr/src/sys/compile/VALCHO
Timecounter "i8254"  frequency 1193176 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (647.60-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134086656 (130944K bytes)
avail memory = 123797504 (120896K bytes)
Preloaded elf kernel "kernel" at 0xc065d000.
Pentium Pro MTRR support enabled
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc05d2182 (1000022)
VESA: S3 Incorporated. M7 BIOS
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c10 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0
atapci0: Busmastering DMA enabled
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 
5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 5.3
pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
pci0: <PCI to CardBus bridge (vendor=1179 device=0617)> at 11.0
pci0: <PCI to CardBus bridge (vendor=1179 device=0617)> at 11.1
pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 
0xefff8000-0xefffffff irq 11 at device 12.0 on pci0
acpi0: <TOSHIB> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0401> can't assign resources
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, 
default to accept, logging disabled
IPv6 packet filtering initialized, default to accept, logging disabled
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.9 initialized.  Default = pass all, Logging = disabled
ata1-master: identify retries exceeded
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master BIOSPIO
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 1
ep0: <3Com 3C556> at port 0x240-0x25f irq 5 slot 1 on pccard1
ep0: Ethernet address 00:00:86:52:40:af



To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to