Juriy Goloveshkin writes: > On Sat, Nov 10, 2001 at 12:12:25AM +0300, Vladimir B. Grebenschikov wrote: > Content-Description: message body text > > If you want to have suspend/wakeup, you should disable acpi-stuff(it is buggy > for all time I've tried to use it). > echo "hint.acpi.0.disable=1" >> /boot/device.hints && reboot > maybe it will work.
It not helps, acpi now turned off, but after resume box completle freezed :( > > After upgrade to -CURRENT I start experience following problems: > > > > - pccard: > > > > Only way to use any pccard device is to insert it before poweron > > If I try to insert or eject card on the fly system completely freezes. > > > > If I've power-up with card inserted some device (two different ATA > > CDROMs) I have significant (20-40s) freeze while booting (after > > pccardd starts) but after it device is detected and works without > > problem. (This problem not related to my Orinco WaveLan card) > > > > it work right on 4.3 > > > > - reboot or Ctrl-Alt-Del shutdowns OS but after it notebook not > > reboots it remains completely freezes and not react on power key > > hold 10sec, so I need plug off AC power and battery to reboot > > notebook. > > > > it work right on 4.3 > > > > - shutdown -p does not work (I have both acpi and apm enabled) but > > pressing power key work perfect. > > > > shutdown -p work right on 4.3 > > > > - acpi: > > acpiconf -sX where X - 3/4/4b/5 turn off system without any > > shutdown at all > > > > - <suspend> and <suspend to disk> works both but after awake system > > shows "right" picture but seems completely freeze > > > > on 4.3 <suspend to disk> always work right and <suspend> sometimes > > broke some timer (CPU load 100% after resume) but works too > > > > > > my dmesg.boot: > > > Content-Description: message body text > > > > my acpidump result > > > Content-Description: message body text > > > > from my rc.conf: > > > > pccard_enable="YES" > > pccardd_flags="-i 11" > > pccard_mem="0xd4000" > > pccard_conf="/etc/pccard.conf" # pccardd(8) config file > > apm_enable="YES" # Set to YES to enable APM BIOS functions (or NO). > > apmd_enable="YES" # Run apmd to handle APM event from userland. > > apmd_flags="" # Flags to apmd (if enabled). > > > > my sysctl hw: > > > Content-Description: message body text > > > > # fgrep -v \# /etc/pccard.conf | head -n 5 > > > > io 0x240-0x360 > > irq 3 10 11 > > memory 0xd4000 96k > > > > Any help/comments will be very helpful, thank you. > > > > -- > > TSB Russian Express, Moscow > > Vladimir B. Grebenschikov, [EMAIL PROTECTED] > > > -- > bye > Juriy Goloveshkin -- TSB Russian Express, Moscow Vladimir B. Grebenschikov, [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
