On 28-Feb-2002 (05:05:40/GMT) Scott Long wrote:
>> Anyway, ugen0 disappear from /dev/ but _no_ umass0 appear,
>> only xpt0...
> The debug trace looks very good.
I think this is the only good news...
> No umass0 device should appear in /dev. Instead, you should
> get a da device. Do 'camcontrol devlist -v' and you should
> see the bus (represented as umass-sim) and a 'da' and 'pass'
> device for the drive.
The only difference in /dev was -ugen{0,0.1,0.2} +xpt0 :(
# camcontrol rescan 0
Re-scan of bus 0 was successful
# camcontrol devlist -v
scbus0 on umass-sim0 bus 0:
scbus-1 on xpt0 bus 0:
< > at scbus-1 target -1 lun -1 (xpt0)
> It also sounds like you have other issues with the device
> not always attaching or detaching correctly.
You mean broken usb, broken device or bad luck?
> This is a weakness of the umass driver, so you'll have to
> experiment a bit to see what works for you.
I'm here. I can _any_ sort of experiment you may need (except
opening case of external hd :-)
Riccardo.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
