I'm still using old 16bit Linksys card and it's not working with newcard. Otherwise newcard is just fine with my Toshiba 3440 when using Cisco Aironet 340. Newcard don't detect Linksys as it should. Is anyone using this card?
--- newcard --- Jun 30 14:58:38 phb kernel: ed0: <Linksys Combo EthernetCard> at port 0x100-0x11f irq 11 function 0 config 16 on pccard1 Jun 30 14:58:38 phb kernel: ed0: address 01:d4:ff:03:00:20, type NE2000 (16 bit) --- oldcard --- Jun 30 16:30:01 phb pccardd[131]: Card "Linksys"("EtherFast 10/100 PC Card (PCMPC100 V2)") [V2.0] [ ] matched "Linksys" ("/Ether[Ff]ast 10/100 PC Card \(PCMPC100.*\)/") [(null)] [(null)] Jun 30 16:30:01 phb pccardd[131]: Using I/O addr 0x300, size 32 Jun 30 16:30:01 phb pccardd[131]: Setting config reg at offs 0x400 to 0x41, Reset time = 50 ms Jun 30 16:30:06 phb kernel: ed0 at port 0x300-0x31f irq 11 flags 0x80000 slot 1 on pccard1 Jun 30 16:30:06 phb kernel: ed0: address 00:e0:98:87:99:a7, type Linksys (16 bit) Jun 30 16:30:06 phb kernel: ukphy0: <Generic IEEE 802.3u media interface> on miibus1 Jun 30 16:30:06 phb kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jun 30 16:30:06 phb pccardd[131]: Assigning I/O window 0, start 0x300, size 0x20 flags 0x5 Jun 30 16:30:06 phb pccardd[131]: Assign ed-1, io 0x300-0x31f, mem 0x0, 0 bytes, irq 11, flags 80000 Jun 30 16:30:06 phb pccardd[131]: ed0: Linksys (/Ether[Ff]ast 10/100 PC Card \(PCMPC100.*\)/) inserted. -- SUN Microsystems Oy PL 112, Lars Sonckin kaari 12, 02601 ESPOO, Finland Tomi Vainio (System Support Engineer) +358 9 52556300 hotline email: [EMAIL PROTECTED] +358 9 52556252 fax To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message