On 21 Aug, Martin Blapp wrote: > > Hi, > > Try to compile the entire system on another box, install it then > on the CURRENT target box, and try again ! > > Bye the way, after 6 rounds, I see now SIG4 and SIG11 too :-/ > To bad - so it's definitly data corruption in CURRENT. > > Asus Board P4B533-V, P-IV 2,26Ghz, 1GB DDR 2100 Ram.
No sign of any problems here with last night's -current. Gigabyte GA7-DX+, Athlon XP 1900+, 1GB PC2100 ECC DRAM, SCSI disk, NFS client. I'm not running any sound hardware or the Xserver, and I'm accessing the host via ssh instead of the console. The kernel is GENERIC + SMBus. It's on buildworld #7 at the moment: -rw-r--r-- 1 root wheel 5321510 Aug 21 14:43 /var/tmp/buildworld24-1 -rw-r--r-- 1 root wheel 5321510 Aug 21 15:38 /var/tmp/buildworld24-2 -rw-r--r-- 1 root wheel 5321510 Aug 21 16:33 /var/tmp/buildworld24-3 -rw-r--r-- 1 root wheel 5321510 Aug 21 17:28 /var/tmp/buildworld24-4 -rw-r--r-- 1 root wheel 5321510 Aug 21 18:23 /var/tmp/buildworld24-5 -rw-r--r-- 1 root wheel 5321510 Aug 21 19:18 /var/tmp/buildworld24-6 -rw-r--r-- 1 root wheel 826096 Aug 21 19:28 /var/tmp/buildworld24-7 I was having filesystem corruption problems a couple months ago, but haven't seen any of these problems in ages. The only outstanding problem is a lock order reversal in the pipe code that is triggered by the OpenOffice port build. Witness complains, but the build completes successfully. Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #34: Wed Aug 21 01:36:34 PDT 2002 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERICSMB Preloaded elf kernel "/boot/kernel/kernel" at 0xc0603000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06030a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1608231091 Hz CPU: AMD Athlon(tm) XP 1900+ (1608.23-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xffffffffc0480000<MP,AMIE,DSP,3DNow!> real memory = 1073676288 (1048512K bytes) avail memory = 1035575296 (1011304K bytes) Pentium Pro MTRR support enabled Using $PIR table, 11 entries at 0xc00fdc30 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <GBT AWRDACPI> on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 agp0: <AMD 761 host to AGP bridge> port 0xc000-0xc003 mem 0xef020000-0xef020fff,0xe8000000-0xebffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xc400-0xc40f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 5 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port error, restarting port 1 uhub0: port error, giving up port 1 uhub0: port error, restarting port 2 uhub0: port error, giving up port 2 uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 5 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub1: port error, restarting port 1 uhub1: port error, giving up port 1 uhub1: port error, restarting port 2 uhub1: port error, giving up port 2 viapropm0: SMBus I/O base at 0x5000 viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at device 7.4 on pci0 viapropm0: SMBus revision code 0x40 smb0: <SMBus generic I/O> on smbus0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe000-0xe03f mem 0xef000000-0xef01ffff,0xef021000-0xef021fff irq 10 at device 10.0 on pci0 fxp0: Ethernet address 00:02:b3:5c:8b:82 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc_pci0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xe400-0xe4ff mem 0xef022000-0xef022fff irq 11 at device 12.0 on pci0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 orm0: <Option ROM> at iomem 0xc0000-0xcc7ff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec Waiting 3 seconds for SCSI devices to settle acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0% Mounting root from ufs:/dev/da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST336706LW 010A> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C) To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message