On 29-Oct-2002 M. Warner Losh wrote: > In message: <[EMAIL PROTECTED]> > Garrett Wollman <[EMAIL PROTECTED]> writes: >: Has anyone managed to make one of these work? I get the following >: messages: >: >: cardbus1: Expecting link target, got 0x59 >: cardbus1: Resource not specified in CIS: id=10, size=100 >: cardbus1: Resource not specified in CIS: id=14, size=400 >: cardbus1: <unknown card> (vendor=0x1737, dev=0xab09) at 0.0 irq 11 >: cbb1: CardBus card activation failed >: >: The box that this card came in was found in my boss's office, unopened >: and gathering dust, so I have no idea how recent it actually is; >: packaging seems to suggest 2001. > > Try loading the dc driver and the rl driver. Oh, wait, this is > vers.2. The ab09 looks similar to the ab02 for the Abocom FE2500. > > I think I have patches in my mailbox to add support for this, but > there was some issue with them that I wanted to get nailed down before > I committed. Hmmm, those patches were for a slightly different card, > with a vendor of 0x13d1, devid 0xab03. Looks like we need to add > some more vendor stuff. Also, I just found the patch in my inbox, and > it looks like there's some stuff that is specific to that card that > isn't called out as such.
Hmm, one I have is version 2. Just a sec... *swaps cardbus cards* cardbus0: Expecting link target, got 0x59 cardbus0: Resource not specified in CIS: id=10, size=100 cardbus0: Resource not specified in CIS: id=14, size=400 dc0: <Abocom FE2500 10/100BaseTX> port 0x1100-0x11ff mem 0x88002000-0x880023ff irq 11 at device 0.0 on cardbus0 dc0: Ethernet address: 00:e0:98:8c:2e:19 miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto On the back it claims to be "Etherfast 10/100 / CardBus PC Card / Model No: PCMPC200" The serial number has a note under it that says "Ver.2" just under the right side of the barcode. Bill Paul got this to work practically eons ago back when cardbus support was first committed. -- John Baldwin <[EMAIL PROTECTED]> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve!" - http://www.FreeBSD.org/ To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message