Maksim Yevmenkin wrote: > 1. Hardware: Attach the USB device into a USB port closer > to the root hub. > > 2. Software: Detect the CRC/Timeout error and count exceeded > and attempt to re-queue the packets while changing the length > of the packets. Changing the length of the packets will change > the CRC and thus will likely remove the combination of the > two events causing the failure. > > Status: > > Fixed in B-0 stepping. > > Note: > > This erratum was carried over from the Intel® 82371EB (PIIX4E). > > </quote> > > Needless to say that i have Intel 82371AB/EB chip in my laptop > *and* i'm getting CRCTO,TIMEOUT errors. all the dumps still > available at
3. Return your hardware for replacement by hardware with B-0 or higher stepping. 8-). Yes, it's likely the problem. The proper fix is probably #2, since it will make it work, no matter if you have bad hardware or not. -- Terry To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message