Hi,
after upgrading to -cuurent as of now on my A30p IBM Notebook I have the
following changed state:
- firewire is working.
I get a "contigmalloc1: size must not be 0" most of the time after a
cold-boot tough.
- I get still some "ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST"
- ATA-CF and SD Cards are working.
- I got a strange
"swap_pager_strategy: bp 0xc3f0f900 blk 0 size 0, not page bounded"
during X-Server startup (maybe DRI related?).
- Anywhere between a past current and now the lpd-device got lost.
I get:
ppc0 port 0x7bc-0x7be,0x3bc-0x3c3 irq 7 drq 0 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
But no lpd (of course it's in the config-file)
Anyway most, of the Noteboot is working.
Congrats to all involved!
Bye!
----
Michael Reifenberger
^.*Plaut.*$, IT, R/3 Basis, GPS
cam: invalid value for tunable kern.cam.scsi_delay
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Nov 20 08:50:17 CET 2002
root@nihil:/usr/src/sys/i386/compile/nihil
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0547000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc05470a8.
Preloaded elf module "/boot/kernel/procfs.ko" at 0xc05470f8.
Preloaded elf module "/boot/kernel/pseudofs.ko" at 0xc05471a4.
Preloaded elf module "/boot/kernel/md.ko" at 0xc0547254.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc05472fc.
Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc05473a8.
Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc0547454.
Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc0547500.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc05475ac.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc0547658.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc0547704.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc05477b0.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc054785c.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc0547908.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc05479b0.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc0547a58.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc0547b04.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc0547bb4.
Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc0547c60.
Preloaded elf module "/boot/kernel/aic.ko" at 0xc0547d0c.
Preloaded elf module "/boot/kernel/if_ed.ko" at 0xc0547db4.
Preloaded elf module "/boot/kernel/nfsserver.ko" at 0xc0547e60.
Preloaded elf module "/boot/kernel/nfsclient.ko" at 0xc0547f10.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc0547fc0.
Preloaded elf module "/boot/kernel/sbp.ko" at 0xc0548070.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0548118.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1198986680 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1198.99-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073086464 (1023 MB)
avail memory = 1037807616 (989 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc034bf62 (1000022)
VESA: ATI MOBILITY RADEON
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1E > on motherboard
Using $PIR table, 14 entries at 0xc00fdeb0
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq 0: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
\\_SB_.LNKH:
interrupts: 3 4 5 6 7 9 10 11
penalty: 1110 1110 110 1110 1110 110 110 710
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKH:
interrupts: 3 4 5 6 7 9 10 11
penalty: 1110 1110 110 1110 1110 110 110 710
references: 1
priority: 685
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon LY Mobility 6 (AGP)> port 0x3000-0x30ff mem
0xc0100000-0xc010ffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at
device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at
device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at
device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.1.0
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.2
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.3
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.0.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.1.0
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.2
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.2.3
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.2
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.4.3
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib2
cbb0: <RF5C478 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on
pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: cbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
cbb1: <RF5C478 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 0.1 on
pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: cbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
XXXfw: vendid=1180, dev=522
fwohci0: <1394 Open Host Controller Interface> mem 0xc0201000-0xc02017ff irq 11 at
device 0.2 on pci2
fwohci0: PCI bus latency was changing to 250.
cache size 0.
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: resetting OHCI...done (0)
fwohci0: BUS_OPT 0xf800a002 -> 0xf800a002
fwohci0: Link 1394a available S400, 2 ports, maxrec 2048 bytes.
fwohci0: Enable 1394a Enhancements
fwohci0: EUI64 00:06:1b:02:01:00:0e:92
fwochi_set_intr: 1
firewire0: <IEEE1394(Firewire) bus> on fwohci0
firewire0: firewire bus attach
sbp_identify
sbp_probe
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach
fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xc0200000-0xc0200fff irq 11 at
device 8.0 on pci2
fxp0: Ethernet address 00:d0:59:34:81:d3
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port
0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device
31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on
pci0
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x7bc-0x7be,0x3bc-0x3c3 irq 7 drq 0 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
orm0: <Option ROMs> at iomem
0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
firewire0: BUS reset
firewire0: node_id = 0x8800ffc0, non CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 0 (me)
fw_set_bus_manager: 63->0 (loop=0)
send phy_config root_node=-1 gap_count=1
start AT DMA status=1e
firewire0: txd err= 0 No stat
system power profile changed to 'economy'
ad0: 45780MB <IC25T048ATDA05-0> [93015/16/63] at ata0-master UDMA100
firewire0:Discover new S400 device ID:0001d200e00918e3
bus_explore done
Device SBP-II
sbp_post_explore: EUI:0001d200e00918e3 spec=1 key=1.
sbp0:0:0 LOGIN
sbp0:0:0 ordered:1 type:14 EUI:0001d200e00918e3 node:1 speed:2 maxrec:5 new!
sbp0:0:0 'Oxford Semiconductor Ltd. ' 'OXFORD IDE Device LUN 0 ' '444131'
sbp0:0:0 login: len 16, ID 0, cmd 0000fffff0100000, recon_hold 0
sbp0:0:0 sbp_busy_timeout
sbp0:0:0 sbp_agent_reset
sbp0:0:0 sbp_do_attach
sbp0:0:0 sbp_cam_scan_lun
ad1: 30520MB <IBM-DJSA-232> [62010/16/63] at ata1-master UDMA66
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2002> at ata0-slave UDMA33
da0 at sbp0 bus 0 target 0 lun 0
da0: <Oxford S OXFORD IDE Devic 4131> Fixed Simplified Direct Access SCSI-4 device
da0: 50.000MB/s transfers
da0: 117246MB (240121728 512 byte sectors: 255H 63S/T 14946C)
cd0 at ata0 bus 0 target 1 lun 0
cd0: <TOSHIBA DVD-ROM SD-R2002 1230> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s3a
system power profile changed to 'performance'
system power profile changed to 'economy'
system power profile changed to 'performance'
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
swap_pager_strategy: bp 0xc3f0f900 blk 0 size 0, not page bounded
