I have installed DP2 on a Sony Vaio r505.
I did compile a new kernel with the OLDCARD config file, add pccard_enable="YES"
on the /etc/rc.conf, and add hw.pci.allow_unsupported_io_range=1 in
/boot/loader.conf
After some testing with a US Robotics 2410 card inserting at before boot time
and after boot, the os freezed and I had to power off the computer. After that,
the system panics:
Memory modified after free 0xc2db9400(508)
panic: Most recently used by devbuf
Debugger("panic")
Stopped at Debugger+0x54 xchgl %ebx,in_Debugger.0
At the 4th boot, I have the following panic:
Fatal trap 18: integer divide fault while in kernel mode
...
Stopped at _mtx_assert+0x1: movl %esp, %ebp
Now, after a 5th reboot the panic goes again to the first system panic. Oh, the
panic appears after the login: screen appears and after there is some file
system checks (I guess).
Thank you,
Jordi
_________________________________________________________
Sorprende a tus amigos con magicas postales animadas. Entra en
http://www.lycos.correomagico.es
