I've experienced -current lock up in exactly the same way twice now;
once with 5.0-RC2, and just now, with sources from 30th December.
The system in question is a Sharp PC-AR50 laptop. In both instances
the system was idle and I was editing a file in vim on ttyv0. Both
systems exhibited the following symptoms:
1. Able to switch terminals using alt-F1..F8, but that's it, I'm un-
able to type anything else (keyboard doesn't respond to letters,
numbers, but capslock and numlock still turn on lights).
2. Responds to pings from other systems on the network.
3. Cannot connect to the machine via ssh from other systems. The
connection is opened, according to ssh -vvv, but just hangs.
4. Mouse cursor not responding to either USB mouse or touchpad.
5. The screensaver (blank) still came on after ten minutes, and I
believe that pressing a key that wasn't previously working turned
it off. (I can't be 100% on that one, it was a pretty random bash
at the keyboard, as you do when you turn off the screen saver.)
6. Trying out keys, pressing ctl-alt-break caused the following to be
printed on ttyv0:
sio4: detached
ad4: removed from config
ata2: detached
7. Trying out more keys, I could page up and down ttyv0 with scroll
lock on.
8. When switching terminals or paging up/down, there was a very, very
small latency between the keypress and the terminal switching or
the page going up or down.
9. ctrl-alt-del did not work, had to hold down the power button for
five seconds (hard shutdown) to turn the laptop off.
I have not noticed any other problems with my laptop, and successfu-
lly builtworld on it a number of times.
Laptop has the following specs: PIII-850MHz, 20GB, DVD, 256MB RAM,
at the time of the last freeze, had a 3Com 56K PCMCIA (3CCM156)
modem in slot 0, and a CompactFlash PC Card adapter with a 256MB
flash card in it in slot 1 -- which wasn't mounted. (Actually,
the modem would have been present in the first freeze as well, but
I doubt the flash card was.)
% uname -a
FreeBSD cherry.limekiln.vcisp.net 5.0-CURRENT FreeBSD 5.0-CURRENT #1: Mon Dec 30
04:33:27 GMT 2002
[EMAIL PROTECTED]:/usr/obj/shared/work/BSD/FreeBSD/FreeBSD-CURRENT/src/sys/CHERRY
i386
I've attached a copy of my kernel config. as well as the output from
boot -v (taken from the next boot after the crash).
Regards,
Trent.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Mon Dec 30 04:33:27 GMT 2002
[EMAIL PROTECTED]:/usr/obj/shared/work/BSD/FreeBSD/FreeBSD-CURRENT/src/sys/CHERRY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0485000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04850b4.
Calibrating clock(s) ... TSC clock: 846271143 Hz, i8254 clock: 1193112 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 846324031 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (846.32-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (255 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004ac000 - 0x0ffe7fff, 263438336 bytes (64316 pages)
avail memory = 255811584 (243 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f71d0
bios32: Entry = 0xfd8a0 (c00fd8a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd8a0+0x12f
pnpbios: Found PnP BIOS data at 0xc00f7200
pnpbios: Entry = f0000:abbe Rev = 1.0
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SHARP PC-XJ800> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 7 entries at 0xc00fdf50
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 12 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 14 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 11 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 11 B 0x61 3 4 5 6 7 9 10 11 12 14 15
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.7.3
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.14.0
\\_SB_.PCI0.ISA_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.12.0
\\_SB_.PCI0.ISA_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.11.0
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.11.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.7.3
\\_SB_.PCI0.ISA_.LNKC irq 10: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.14.0
\\_SB_.PCI0.ISA_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.12.0
\\_SB_.PCI0.ISA_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.11.0
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
0.11.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcc0, size 5, port disabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[90]: type 4, range 32, base 00002180, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x03
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000f800, size 8, port disabled
map[14]: type 1, range 32, base fedffc00, size 10, memory disabled
found-> vendor=0x1113, dev=0x1216, revid=0x11
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0010, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fedfe000, size 12, memory disabled
found-> vendor=0x104c, dev=0xac42, revid=0x00
bus=0, slot=12, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fedfd000, size 12, memory disabled
found-> vendor=0x104c, dev=0xac42, revid=0x00
bus=0, slot=12, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fedff000, size 11, memory disabled
map[14]: type 1, range 32, base fedf8000, size 14, enabled
found-> vendor=0x104c, dev=0x8027, revid=0x00
bus=0, slot=12, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0010, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, enabled
found-> vendor=0x125d, dev=0x1988, revid=0x12
bus=0, slot=14, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000f000, size 8, enabled
found-> vendor=0x125d, dev=0x1989, revid=0x12
bus=0, slot=14, func=1
class=07-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfd000000-0xfecfffff
pcib1: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.ISA_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 14 15] low,level,sharable
1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 4, range 32, base 0000e800, size 8, enabled
map[18]: type 1, range 32, base fecfe000, size 12, enabled
found-> vendor=0x1002, dev=0x4c4d, revid=0x64
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
ata1: mask=03 ostat0=50 ostat2=01
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=01
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfcc0-0xfcdf irq 5 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
dc0: <Accton EN2242 MiniPCI 10/100BaseTX> port 0xf800-0xf8ff mem 0xfedffc00-0xfedfffff
irq 11 at device 11.0 on pci0
dc0: Ethernet address: 00:d0:59:29:2e:f0
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000895, model 0x0001, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
cbb0: <TI4451 PCI-CardBus Bridge> mem 0xfedfe000-0xfedfefff irq 11 at device 12.0 on
pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI4451 PCI-CardBus Bridge> mem 0xfedfd000-0xfedfdfff irq 11 at device 12.1 on
pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <serial bus, FireWire> at device 12.2 (no driver attached)
pci0: <multimedia, audio> at device 14.0 (no driver attached)
pci0: <simple comms> at device 14.1 (no driver attached)
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
acpi_button0: <Sleep Button> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
9e 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
9f a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
acpi_acad0: acline initialization start
system power profile changed to 'economy'
acpi_cpu0: set speed to 50.0%
acpi_acad0: Off Line
acpi_cmbat0: battery initialization start
acpi_cmbat1: battery initialization start
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: 3COM, 3CCM156, 56K Global Modem PC Card
pccard0: Manufacturer code 0x101, product 0x39
pccard0: function 0: serial port, ccr addr 300 mask 3
pccard0: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, iospace
3f8-3ff; rdybsy_active io8 irqlevel powerdown audio
pccard0: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace
2f8-2ff; rdybsy_active io8 irqlevel powerdown audio
pccard0: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace
3e8-3ef; rdybsy_active io8 irqlevel powerdown audio
pccard0: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace
2e8-2ef; rdybsy_active io8 irqlevel powerdown audio
pccard0: Allocation failed for cfe 32
sio4 at port 0x2f8-0x2ff irq 11 function 0 config 33 on pccard0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
pccard1: CIS version PCCARD 2.0 or 2.1
pccard1: CIS info: TOSHIBA THNCF256MBA , , ,
pccard1: Manufacturer code 0x98, product 0x0
pccard1: function 0: fixed disk, ccr addr 200 mask f
pccard1: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff;
mwait_required rdybsy_active powerdown
pccard1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace
0-f; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pccard1: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace
1f0-1f7 3f6-3f7; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel
powerdown
pccard1: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace
170-177 376-377; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel
powerdown
pccard1: Allocation failed for cfe 0
ata2 at port 0x100-0x10f irq 11 function 0 config 1 on pccard1
ata2: iobase=0x0100 altiobase=0x0110 bmaddr=0x0000
ata2: mask=01 ostat0=50 ostat2=00
ata2-master: ATAPI 00 00
ata2: mask=01 stat0=50 stat1=00
ata2-master: ATA 01 a5
ata2: devices=01
ata1-slave: ATAPI identify retries exceeded
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <FUJITSU MHM2200AT/3822> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ar: FreeBSD check1 failed
ad4: <TOSHIBA THNCF256MBA/2.00> ATA-0 disk at ata2-master
ad4: 244MB (500736 sectors), 978 C, 16 H, 32 S, 512 B
ad4: 1 secs/int, 1 depth queue, BIOSPIO
ad4: piomode=2 dmamode=-1 udmamode=-1 cblid=0
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <UJDA540/1.30> DVD-ROM drive at ata1 as master
acd0: read 4132KB/s (34015KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s1, start 32256 length 12584646144 end 12584678399
GEOM: Configure ad0s2, start 12584678400 length 7419202560 end 20003880959
GEOM: new disk ad4
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 536870912 end 671088639
GEOM: Configure ad0s2c, start 0 length 7419202560 end 7419202559
GEOM: Configure ad0s2d, start 671088640 length 134217728 end 805306367
GEOM: Configure ad0s2e, start 805306368 length 134217728 end 939524095
GEOM: Configure ad0s2f, start 939524096 length 6479678464 end 7419202559
GEOM: Configure ad4s1, start 16384 length 256098304 end 256114687
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 16 files 1
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 0 files 1
WARNING: /var/tmp was not properly dismounted
splash: image decoder found: blank_saver
Linux ELF exec handler installed
acpi_acad0: acline initialization done, tried 7 times
acpi_cmbat0: battery initialization failed, giving up
acpi_cmbat1: battery initialization failed, giving up
machine i386
cpu I686_CPU
ident CHERRY
maxusers 0
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# # output. Adds ~128k to driver.
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# # output. Adds ~215k to driver.
# Debugging for use in -current
options DDB #Enable the kernel debugger
#options INVARIANTS #Enable calls of extra sanity checking
#options INVARIANT_SUPPORT #Extra sanity checks of internal structures,
required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT-Fusion
##device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
#
## RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options!
#device iir # Intel Integrated RAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#
## SCSI peripherals
#device scbus # SCSI bus (required)
#device ch # SCSI media changers
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)
#
## RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device amr # AMI MegaRAID
#device ida # Compaq Smart RAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#evice rl # RealTek 8129/8139
#evice sf # Adaptec AIC-6915 (``Starfire'')
#evice sis # Silicon Integrated Systems SiS 900/SiS 7016
#evice ste # Sundance ST201 (D-Link DFE-550TX)
#evice tl # Texas Instruments ThunderLAN
#evice tx # SMC EtherPower II (83c170 ``EPIC'')
#evice vr # VIA Rhine, Rhine II
#evice wb # Winbond W89C840F
#evice xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#evice bge # Broadcom BCM570xx Gigabit Ethernet
# ISA Ethernet NICs. pccard nics included.
#evice cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#evice ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#evice ex # Intel EtherExpress Pro/10 and Pro/10+
#evice ep # Etherlink III based cards
#evice fe # Fujitsu MB8696x based cards
#evice lnc # NE2100, NE32-VL Lance Ethernet cards
#evice sn # SMC's 9000 series of ethernet chips
#evice xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
#evice an # Aironet 4500/4800 802.11 wireless NICs.
#evice awi # BayStack 660 and others
#evice wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device snp # Snoop device
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
