I just upgraded my 4.7 system to 5.0-current via sources. Everything went smoothly, and I was up and running quickly, but with an acpi related problem.
When booting, the kernel loads, detects the devices, then hangs right here: Mounting root from ufs:/dev/ad0s1a pid 84 (fsck_ufs), uid 0: exited on signal 8 No panic, just a hang. Disabling acpi takes the hang away. The system is up to date as of the 22nd, running on an ASUS A7V266. The rest of the details are attached in an acpi-less dmesg. Also included is the output from fdisk. -- ========================================================== = Bryan D. Liesner LeezSoft Communications, Inc. = = A subsidiary of LeezSoft Inc. = = [EMAIL PROTECTED] Home of the Gipper = ==========================================================
******* Working on device /dev/ad0 ******* parameters extracted from in-core disklabel are: cylinders=116336 heads=16 sectors/track=63 (1008 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=116336 heads=16 sectors/track=63 (1008 blks/cyl) Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 117266625 (57259 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 1023/ head 130/ sector 63 The data for partition 2 is: <UNUSED> The data for partition 3 is: <UNUSED> The data for partition 4 is: <UNUSED>
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Thu Jan 23 18:58:33 EST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GRAVY Preloaded elf kernel "/boot/kernel/kernel" at 0xc0495000. Preloaded elf module "/boot/kernel/radeon.ko" at 0xc04950b4. Calibrating clock(s) ... TSC clock: 1544533484 Hz, i8254 clock: 1193206 Hz Timecounter "i8254" frequency 1193206 Hz TSC initialization skipped: APM enabled. CPU: AMD Athlon(TM) XP1800+ (1544.53-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536788992 (511 MB) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x004bc000 - 0x1ffe3fff, 531791872 bytes (129832 pages) avail memory = 516505600 (492 MB) bios32: Found BIOS32 Service Directory header at 0xc00f1470 bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdf0 pnpbios: Found PnP BIOS data at 0xc00fbd80 pnpbios: Entry = f0000:bdb0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: Initializing GEOMetry subsystem netsmb_dev: loaded null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 00 04 00 01 0e 01 00 01 24 01 00 01 29 01 00 01 6a 00 02 01 04 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 VESA: 56 mode(s) found VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc03fb2c2 (1000022) VESA: ATI RADEON VE VESA: ATI Technologies Inc. R100 01.00 random: <entropy source> npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=30991106) Using $PIR table, 10 entries at 0xc00f13a0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 5 A 0x02 3 4 5 7 9 10 11 12 embedded 0 5 B 0x03 3 4 5 7 9 10 11 12 embedded 0 6 A 0x05 3 4 5 7 9 10 11 12 slot 1 0 12 A 0x05 3 4 5 7 9 10 11 12 slot 1 0 12 B 0x01 3 4 5 7 9 10 11 12 slot 1 0 12 C 0x02 3 4 5 7 9 10 11 12 slot 1 0 12 D 0x03 3 4 5 7 9 10 11 12 slot 2 0 13 A 0x01 3 4 5 7 9 10 11 12 slot 2 0 13 B 0x02 3 4 5 7 9 10 11 12 slot 2 0 13 C 0x03 3 4 5 7 9 10 11 12 slot 2 0 13 D 0x05 3 4 5 7 9 10 11 12 slot 3 0 14 A 0x02 3 4 5 7 9 10 11 12 slot 3 0 14 B 0x03 3 4 5 7 9 10 11 12 slot 3 0 14 C 0x05 3 4 5 7 9 10 11 12 slot 3 0 14 D 0x01 3 4 5 7 9 10 11 12 slot 4 0 15 A 0x03 3 4 5 7 9 10 11 12 slot 4 0 15 B 0x05 3 4 5 7 9 10 11 12 slot 4 0 15 C 0x01 3 4 5 7 9 10 11 12 slot 4 0 15 D 0x02 3 4 5 7 9 10 11 12 slot 5 0 16 A 0x05 3 4 5 7 9 10 11 12 slot 5 0 16 B 0x01 3 4 5 7 9 10 11 12 slot 5 0 16 C 0x02 3 4 5 7 9 10 11 12 slot 5 0 16 D 0x03 3 4 5 7 9 10 11 12 slot 6 1 0 A 0x01 3 4 5 7 9 10 11 12 slot 6 1 0 B 0x02 3 4 5 7 9 10 11 12 embedded 0 17 A 0x01 3 4 5 7 9 10 11 12 embedded 0 17 B 0x02 3 4 5 7 9 10 11 12 embedded 0 17 C 0x03 3 4 5 7 9 10 11 12 embedded 0 17 D 0x05 3 4 5 7 9 10 11 12 embedded 0 18 A 0x01 3 4 5 7 9 10 11 12 embedded 0 18 B 0x02 3 4 5 7 9 10 11 12 embedded 0 18 C 0x03 3 4 5 7 9 10 11 12 embedded 0 18 D 0x05 3 4 5 7 9 10 11 12 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x1106, dev=0x3099, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb099, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000b800, size 6, enabled found-> vendor=0x1274, dev=0x1371, revid=0x08 bus=0, slot=14, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x28 (1200 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=10 powerspec 1 supports D0 D2 D3 current D3 map[10]: type 4, range 32, base 0000b400, size 3, enabled map[14]: type 4, range 32, base 0000b000, size 2, enabled map[18]: type 4, range 32, base 0000a800, size 3, enabled map[1c]: type 4, range 32, base 0000a400, size 2, enabled map[20]: type 4, range 32, base 0000a000, size 4, enabled map[24]: type 1, range 32, base ee800000, size 14, enabled found-> vendor=0x105a, dev=0x4d69, revid=0x02 bus=0, slot=15, func=0 class=01-80-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0430, cachelnsz=8 (dwords) lattimer=0x28 (1200 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns) intpin=a, irq=12 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 4, range 32, base 00009800, size 6, enabled found-> vendor=0x10b7, dev=0x9050, revid=0x00 bus=0, slot=16, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x28 (1200 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns) intpin=a, irq=5 found-> vendor=0x1106, dev=0x3074, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00009400, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00009000, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x1b bus=0, slot=17, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x28 (1200 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00008800, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x1b bus=0, slot=17, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x28 (1200 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 00008400, size 5, enabled found-> vendor=0x1106, dev=0x3038, revid=0x1b bus=0, slot=17, func=4 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x28 (1200 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=5 powerspec 2 supports D0 D3 current D0 agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xef000000-0xefdfffff pcib1: prefetched decode 0xeff00000-0xf7ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 4, range 32, base 0000d800, size 8, enabled map[18]: type 1, range 32, base ef000000, size 16, enabled found-> vendor=0x1002, dev=0x5159, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: <ATI Radeon QY VE (AGP)> port 0xd800-0xd8ff mem 0xef000000-0xef00ffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xf8000000 64MB info: [drm] Initialized radeon 1.1.1 20010405 on minor 0 pcm0: <AudioPCI ES1373-8> port 0xb800-0xb83f irq 10 at device 14.0 on pci0 pcm0: ac97 codec id 0x43525913 (Cirrus Logic CS4297A) pcm0: ac97 codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement pcm0: ac97 primary codec extended features AMAP pcm0: sndbuf_setmap 6ae000, 1000; 0xc403a000 -> 6ae000 pcm0: sndbuf_setmap 64c000, 1000; 0xc4038000 -> 64c000 atapci0: <Promise TX2 ATA133 controller> port 0xa000-0xa00f,0xa400-0xa403,0xa800-0xa807,0xb000-0xb003,0xb400-0xb407 mem 0xee800000-0xee803fff irq 12 at device 15.0 on pci0 ata2: iobase=0xb400 altiobase=0xb002 bmaddr=0xa000 ata2: mask=03 ostat0=50 ostat2=00 ata2-master: ATAPI 00 00 ata2-slave: ATAPI 00 00 ata2: mask=03 stat0=50 stat1=00 ata2-master: ATA 01 a5 ata2: devices=01 ata2: at 0xb400 on atapci0 ata3: iobase=0xa800 altiobase=0xa402 bmaddr=0xa008 ata3: mask=03 ostat0=20 ostat2=30 ata3-master: ATAPI 20 20 ata3-slave: ATAPI 30 30 ata3: mask=03 stat0=20 stat1=30 ata3-master: ATA 25 25 ata3-slave: ATA 25 25 ata3: devices=00 ata3: at 0xa800 on atapci0 xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x9800-0x983f irq 5 at device 16.0 on pci0 xl0: Ethernet address: 00:60:08:45:f2:c6 xl0: media options word: e040 xl0: found MII/AUTO miibus0: <MII bus> on xl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached viapropm0: SMBus I/O base at 0xe800 viapropm0: <VIA VT8233 Power Management Unit> port 0xe800-0xe80f at device 17.0 on pci0 viapropm0: SMBus revision code 0x0 atapci1: <VIA 8233 ATA100 controller> port 0x9400-0x940f at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x9400 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 14 eb ata0-slave: ATAPI 14 eb ata0: mask=03 stat0=00 stat1=00 ata0: devices=0c ata0: at 0x1f0 irq 14 on atapci1 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x9408 ata1: mask=01 ostat0=50 ostat2=ff ata1-master: ATAPI 14 eb ata1: mask=01 stat0=10 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci1 uhci0: <VIA 83C572 USB controller> port 0x9000-0x901f irq 5 at device 17.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: Buslink USB 2.0 Hard Drive, rev 2.00/11.00, addr 2 umass0:0:0:-1: Attached to scbus0 as device 0 ums0: Logitech Trackball, rev 1.10/2.20, addr 3, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <VIA 83C572 USB controller> port 0x8800-0x881f irq 5 at device 17.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ufm0: GemTek Corp USB FM Radio, rev 1.00/4.10, addr 2 uhci2: <VIA 83C572 USB controller> port 0x8400-0x841f irq 5 at device 17.4 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered isa0: <ISA bus> on motherboard pnpbios: 14 devices, largest 114 bytes PNP0401: adding dma mask 0x8 PNP0401: adding irq mask 0x80 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77f, size=0x8, align=0 pnpbios: handle 1 device ID PNP0401 (0104d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 2 device ID PNP0501 (0105d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 pnpbios: handle 3 device ID PNP0501 (0105d041) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 pnpbios: handle 4 device ID PNP0700 (0007d041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000 PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xce800-0xcffff, size=0x1800 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 pnpbios: handle 6 device ID PNP0c01 (010cd041) PNP0000: adding irq mask 0x4 PNP0000: adding io range 0x20-0x21, size=0x2, align=0 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0 PNP0000: adding io range 0x4d0-0x4d1, size=0x2, align=0 pnpbios: handle 7 device ID PNP0000 (0000d041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 8 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x75, size=0x6, align=0 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 10 device ID PNP0303 (0303d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0 pnpbios: handle 11 device ID PNP0c04 (040cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x90, size=0x11, align=0 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0 pnpbios: handle 12 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 13 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 14 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0 PNP0c02: adding io range 0xe800-0xe83f, size=0x40, align=0 pnpbios: handle 15 device ID PNP0c02 (020cd041) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xcafff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: <Canon BJC-1000/1.21> PRINTER BJL,BJRaster,BSCC,TXT01 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 Device configuration finished. procfs registered Timecounters tick every 10.000 msec splash: image decoder found: green_saver lo0: bpf attached Linux ELF exec handler installed ad0: success setting UDMA6 on Promise chip GEOM: new disk ad0 ar: Promise check1 failed ad0: <MAXTOR 6L060J3/A93.0500> ATA-5 disk at ata2-master ad0: 57259MB (117266688 sectors), 116336 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA133 ad0: piomode=4 dmamode=2 udmamode=6 cblid=1 ata0-master: piomode=4 dmamode=2 udmamode=4 dmaflag=1 ata0-master: DMA limited to UDMA33, non-ATA66 cable or device ata0-master: success setting UDMA2 on VIA chip ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata0-slave: success setting UDMA2 on VIA chip ata1-master: piomode=0 dmamode=-1 udmamode=-1 dmaflag=0 ata1-master: success setting PIO0 on generic chip [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):255/130/255 s:63 l:117266625 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 60040512000 end 60040544255 GEOM: Add ad0 hot[0] start 512 length 276 end 787 GEOM: Configure ad0a, start 0 length 58991837184 end 58991837183 GEOM: Configure ad0b, start 58991837184 length 1048707072 end 60040544255 GEOM: Configure ad0c, start 0 length 60040544256 end 60040544255 GEOM: Add ad0s1 hot[0] start 512 length 276 end 787 GEOM: Configure ad0s1a, start 0 length 58966671360 end 58966671359 GEOM: Configure ad0s1b, start 58966671360 length 1073840640 end 60040511999 GEOM: Configure ad0s1c, start 0 length 60040512000 end 60040511999 GEOM: Add ad0a hot[0] start 512 length 276 end 787 GEOM: Add ad0c hot[0] start 512 length 276 end 787 GEOM: Add ad0s1a hot[0] start 512 length 276 end 787 GEOM: Add ad0s1c hot[0] start 512 length 276 end 787 (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe4:ata2:0:0:0): CAM Status 0x39 (probe4:ata2:0:0:0): Retrying Command (probe5:ata2:0:1:0): CAM Status 0x39 (probe5:ata2:0:1:0): Retrying Command (probe6:ata3:0:0:0): CAM Status 0x39 (probe6:ata3:0:0:0): Retrying Command (probe7:ata3:0:1:0): CAM Status 0x39 (probe7:ata3:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe4:ata2:0:0:0): CAM Status 0x39 (probe4:ata2:0:0:0): Retrying Command (probe5:ata2:0:1:0): CAM Status 0x39 (probe5:ata2:0:1:0): Retrying Command (probe6:ata3:0:0:0): CAM Status 0x39 (probe6:ata3:0:0:0): Retrying Command (probe7:ata3:0:1:0): CAM Status 0x39 (probe7:ata3:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe4:ata2:0:0:0): CAM Status 0x39 (probe4:ata2:0:0:0): Retrying Command (probe5:ata2:0:1:0): CAM Status 0x39 (probe5:ata2:0:1:0): Retrying Command (probe6:ata3:0:0:0): CAM Status 0x39 (probe6:ata3:0:0:0): Retrying Command (probe7:ata3:0:1:0): CAM Status 0x39 (probe7:ata3:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe4:ata2:0:0:0): CAM Status 0x39 (probe4:ata2:0:0:0): Retrying Command (probe5:ata2:0:1:0): CAM Status 0x39 (probe5:ata2:0:1:0): Retrying Command (probe6:ata3:0:0:0): CAM Status 0x39 (probe6:ata3:0:0:0): Retrying Command (probe7:ata3:0:1:0): CAM Status 0x39 (probe7:ata3:0:1:0): Retrying Command (probe3:ata1:0:1:0): error 5 (probe3:ata1:0:1:0): Retries Exhausted (probe4:ata2:0:0:0): error 5 (probe4:ata2:0:0:0): Retries Exhausted (probe5:ata2:0:1:0): error 5 (probe5:ata2:0:1:0): Retries Exhausted (probe6:ata3:0:0:0): error 5 (probe6:ata3:0:0:0): Retries Exhausted (probe7:ata3:0:1:0): error 5 (probe7:ata3:0:1:0): Retries Exhausted (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe4:ata2:0:0:0): CAM Status 0x39 (probe4:ata2:0:0:0): Retrying Command (probe5:ata2:0:1:0): CAM Status 0x39 (probe5:ata2:0:1:0): Retrying Command (probe6:ata3:0:0:0): CAM Status 0x39 (probe6:ata3:0:0:0): Retrying Command (probe7:ata3:0:1:0): CAM Status 0x39 (probe7:ata3:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe4:ata2:0:0:0): CAM Status 0x39 (probe4:ata2:0:0:0): Retrying Command (probe5:ata2:0:1:0): CAM Status 0x39 (probe5:ata2:0:1:0): Retrying Command (probe6:ata3:0:0:0): CAM Status 0x39 (probe6:ata3:0:0:0): Retrying Command (probe7:ata3:0:1:0): CAM Status 0x39 (probe7:ata3:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe4:ata2:0:0:0): CAM Status 0x39 (probe4:ata2:0:0:0): Retrying Command (probe5:ata2:0:1:0): CAM Status 0x39 (probe5:ata2:0:1:0): Retrying Command (probe6:ata3:0:0:0): CAM Status 0x39 (probe6:ata3:0:0:0): Retrying Command (probe7:ata3:0:1:0): CAM Status 0x39 (probe7:ata3:0:1:0): Retrying Command (probe3:ata1:0:1:0): CAM Status 0x39 (probe3:ata1:0:1:0): Retrying Command (probe4:ata2:0:0:0): CAM Status 0x39 (probe4:ata2:0:0:0): Retrying Command (probe5:ata2:0:1:0): CAM Status 0x39 (probe5:ata2:0:1:0): Retrying Command (probe6:ata3:0:0:0): CAM Status 0x39 (probe6:ata3:0:0:0): Retrying Command (probe7:ata3:0:1:0): CAM Status 0x39 (probe7:ata3:0:1:0): Retrying Command (probe3:ata1:0:1:0): error 5 (probe3:ata1:0:1:0): Retries Exhausted (probe4:ata2:0:0:0): error 5 (probe4:ata2:0:0:0): Retries Exhausted (probe5:ata2:0:1:0): error 5 (probe5:ata2:0:1:0): Retries Exhausted (probe6:ata3:0:0:0): error 5 (probe6:ata3:0:0:0): Retries Exhausted (probe7:ata3:0:1:0): error 5 (probe7:ata3:0:1:0): Retries Exhausted (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe0:ata0:0:0:0): error 6 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 6 (probe1:ata0:0:1:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <SAMSUNG SV4002H QP10> Fixed Direct Access SCSI-0 device pass0: Serial Number \^_ pass0: 1.000MB/s transfers pass1 at ata0 bus 0 target 0 lun 0 pass1: <ATAPI CD-ROM MAX 52X 1.32> Removable CD-ROM SCSI-0 device pass1: 33.000MB/s transfers pass2 at ata0 bus 0 target 1 lun 0 pass2: <SONY CD-RW CRX175A1 5YS2> Removable CD-ROM SCSI-0 device pass2: 33.000MB/s transfers pass3 at ata1 bus 0 target 0 lun 0 pass3: <IOMEGA ZIP 100 14.A> Removable Direct Access SCSI-0 device pass3: 3.300MB/s transfers GEOM: new disk da0 GEOM: new disk da1 (cd0:ata0:0:0:0): error 6 (cd0:ata0:0:0:0): Unretryable Error cd0 at ata0 bus 0 target 0 lun 0 cd0: <ATAPI CD-ROM MAX 52X 1.32> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present da1 at ata1 bus 0 target 0 lun 0 da1: <IOMEGA ZIP 100 14.A> Removable Direct Access SCSI-0 device da1: 3.300MB/s transfers da1: 96MB (196608 512 byte sectors: 64H 32S/T 96C) (cd1:ata0:0:1:0): error 6 (cd1:ata0:0:1:0): Unretryable Error cd1 at ata0 bus 0 target 1 lun 0 cd1: <SONY CD-RW CRX175A1 5YS2> Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SAMSUNG SV4002H QP10> Fixed Direct Access SCSI-0 device da0: Serial Number \^_ da0: 1.000MB/s transfers da0: 38204MB (78242976 512 byte sectors: 255H 63S/T 4870C) [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):255/254/255 s:63 l:78236487 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 40057081344 end 40057113599 GEOM: Add da0 hot[0] start 512 length 276 end 787 GEOM: Configure da0c, start 0 length 40060403712 end 40060403711 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):255/255/255 s:0 l:50000 GEOM: Add da1 hot[0] start 512 length 276 end 787 GEOM: Configure da1a, start 0 length 100663296 end 100663295 GEOM: Configure da1c, start 0 length 100663296 end 100663295 GEOM: Add da0s1 hot[0] start 512 length 276 end 787 GEOM: Configure da0s1c, start 0 length 40057081344 end 40057081343 GEOM: Configure da0s1e, start 0 length 40057081344 end 40057081343 GEOM: Add da0c hot[0] start 512 length 276 end 787 GEOM: Add da1a hot[0] start 512 length 276 end 787 GEOM: Add da1c hot[0] start 512 length 276 end 787 GEOM: Add da0s1c hot[0] start 512 length 276 end 787 GEOM: Add da0s1e hot[0] start 512 length 276 end 787 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init