I'm trying to create a raid set but after hitting the end of initializing a raid5
stripe the following is displayed on the console:
raid0: node (Rod) returned fail, rolling backward
raid0: IO Error. Marking /dev/da2s1e as failed.
raid0: node (Rod) returned fail, rolling backward
raid0: IO Error. Marking /dev/da1s1e as failed.
raid0: node (Rod) returned fail, rolling backward
Unable to verify parity: can't read the stripe
Could not verify parity
raid0: Error re-writing parity!
Multiple disks failed in a single group! Aborting I/O operation.
Multiple disks failed in a single group! Aborting I/O operation.
Multiple disks failed in a single group! Aborting I/O operation.
[Failed to create a DAG]
panic: raidframe error at line 459 file /usr/src/sys/dev/raidframe/rf_states.c
cpuid = 0; lapic.id = 00000000
boot() called on cpu#0
syncing disks, buffers remaining... panic: bdwrite: buffer is not busy
cpuid = 0; lapic.id = 00000000
boot() called on cpu#0
Uptime: 38m47s
Shutting down raid0
Terminate ACPI
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
cpu_reset called on cpu#0
cpu_reset: Stopping other CPUs
dmesg gives the following as disks:
da0 at ahd0 bus 0 target 0 lun 0
da0: <IBM IC35L036UCD210-0 S5BS> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <IBM IC35L036UCD210-0 S5BS> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da2 at ahd0 bus 0 target 2 lun 0
da2: <IBM IC35L036UCD210-0 S5BS> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da3 at ahd0 bus 0 target 3 lun 0
da3: <IBM IC35L036UCD210-0 S5BS> Fixed Direct Access SCSI-3 device
da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
> cat /etc/raid0.conf
START array
1 3 0
START disks
/dev/da1s1e
/dev/da2s1e
/dev/da3s1e
START layout
16 1 1 5
START queue
fifo 100
Pete
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
