Hi,
On Thu, Feb 20, 2003 at 11:32:04AM -0500, Andrew R. Reiter wrote:
> I experienced similar issues yesterday when just installing release 5 from
> ftp (floppy boot). I essentially had to ifconfig the device down and then
> back up and it then seemed to continue ok... but I think there most likely
> something odd going on :/
>
> On Thu, 20 Feb 2003, Kevin Oberman wrote:
> :I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
> :and the Ethernet was not working. I tried again last night with no
> :change in behavior.
> :
> :The system is an AMD K6-2 on an ASUS P5A mobo. I have a 3Com 3c905B
> :Ethernet which had been working fine on a kernel built in late
> :January.
> :
> :The dmesg is not too meaningful, but the system shows no errors. It
> :simply never receives a packet. ARPs are all incomplete and no packets
> :are transmitted although netstat -in indicates that they are. The
> :packets never actually reach the wire, though.
> :
> :I can't believe that no one else has this card, but I didn't find
> :anything in the archives on it.
> :
> :Any idea what needs to be rolled back and how far? I'm suspicious that
> :it might be an mii problem. Maybe even an interrupt issue. I an
> :suspicious of the second, empty xlphy0: line in the dmesg, but the
> :reported MAC is right and my old kernel that works seems to generate a
> :similar empty line.
I have had the same problem with a "3Com 3c905B-COMBO". But the system
was a 4.7-RELEASE. If you used the the media-Option in /etc/rc.conf it
doesn't work. It was necessary to boot the system with a wrong media
type, mark the interface down and mark the interface up with the correct
media type. Than it works. But at that time I had no time to analyse
this behaviour.
Jan
Here are the old boot messages (no errors):
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(tm) Processor (756.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x631 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 134135808 (130992K bytes)
avail memory = 125349888 (122412K bytes)
Preloaded elf kernel "kernel" at 0xc050f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc050f09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f1720
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA brid/ge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4
xl0: <3Com 3c905B-COMBO Fast Etherlink XL> port 0x9400-0x947f mem
0xdd000000-0xdd00007f irq 5 at device 10.0 on pci0
xl0: Ethernet address: 00:01:02:2f:42:0a
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise ATA100 controller> port
0x7800-0x783f,0x8000-0x8003,0x8400-0x8407,0x8800-0x8803,0x9000-0x9007 mem
0xdc800000-0xdc81ffff irq 10 at device 17.0 on pci0
ata2: at 0x9000 on atapci1
ata3: at 0x8400 on atapci1
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc97ff,0xcc000-0xcffff,0xd0000-0xd1fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
...
--
[ gpg key: http://nl3.physik.tu-berlin.de/~jan/jschlesn.gpg ]
[ key fingerprint: 4236 3497 C4CF 4F3A 274F B6E2 C4F6 B639 1DF4 CF0A ]
--
It's better to reign in hell,
than to serve in heaven...
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
