Dear FreeBSD,
I have installed 5.0 into a new Dell. I have not set up anything
special yet (no firewall, no natd, etc.).
I can ssh out to the world, but I can't get into the new box from the
gateway FreeBSD box on the same home network. The gateway box properly
lists the new box in /etc/hosts. Each box can ping the other by name
and by ip.
I have tried the OpenSSH that came with the system, and I
installed ssh-3.0 , and the result is the same. sshd is running
on the new box.
I enabled telnet in inetd.conf, and I get rejected, also.
Is there a new default connecton protection that I must turn off, or
something? [/etc/hosts.allow is the default setting, I see no answer
there.]
- Wayne
--------- example screen output below. The new box is etaq3 ------
[EMAIL PROTECTED]:/home/wayne>ssh etaq3
ssh_exchange_identification: read: Connection reset by peer
[EMAIL PROTECTED]:/home/wayne>telnet etaq3
Trying 192.168.0.12...
Connected to etaq3.etaq.com.
Escape character is '^]'.
Connection closed by foreign host.
[EMAIL PROTECTED]:/home/wayne>ping etaq3
PING etaq3.etaq.com (192.168.0.12): 56 data bytes
64 bytes from 192.168.0.12: icmp_seq=0 ttl=64 time=0.402 ms
64 bytes from 192.168.0.12: icmp_seq=1 ttl=64 time=0.618 ms
64 bytes from 192.168.0.12: icmp_seq=2 ttl=64 time=0.344 ms
--
Wayne M Barnes
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
