I posted this in April and received no response. However, this has been an ongoing issue since at least 2001 (where I found the first reference to this trouble via Google).
The problem seems to be that the FreeBSD USB LPT driver (even with no-reset) is somehow dropping the first bits of the data stream, causing a page full of trash to be printed prior to the actual print job. I have no verified this problem with 5.1-RELEASE as well. ---- I have a machine that has been serving as a print server. That machine was running CUPS and SAMBA over Linux. Now, it is running FreeBSD 5.0-RELEASE-p7 with CUPS and SAMBA. I have a Lexmark Optra 312 laser printer hooked up to the usb port, ulpt0 (no reset). When it was running linux, everything ran perfectly. I allow the Windows client machines to use their print drivers and send a raw stream through samba to cups for printing. This configuration has worked fine. However, for reasons of my own, I have put FreeBSD 5.0 on this machine. The same software configuration exists for printing. Now, when I print most pages, I get an extra page prefixing the job with two or three lines of printer commands (i.e. resolution = 600, @PCL, etc). This seems to be caused by the FreeBSD usb printer driver dropping a couple of characters at the beginning of the command stream. This used to happen to me with FreeBSD 4.6 as well, which is why that machine was running Linux in the first place. Has anybody seen this strange behavior and is there a known fix for it? Thanks in advance, Tom Veldhouse _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"