Thanks for getting back to me regarding that point Scott. I recently realized that I was miss-understanding how much free memory I had on the system, and I doubt I even need the full 4Gig's.
Perhaps I can re-confirm how to check how much free real memory is available on the system. Looking at the top command, add the Inact and Free memory? Mem: 180M Active, 499M Inact, 213M Wired, 76K Cache, 112M Buf, 2999M Free so in this case, 3498 actual free memory? Or is there a more accurate way in determining how much memory is left in the system to be used... basically I'm trying to find the indicator I should be monitoring that should tell me if I need to add more ram to the system then I currently have. Thanks, Stephane. ----- Original Message ----- From: "Scott Long" <[EMAIL PROTECTED]> Newsgroups: mailing.freebsd.current Sent: Wednesday, July 23, 2003 14:09 Subject: Re: FreeBSD 5.1-R kernel panic > Stephane Raimbault wrote: > > Hi Thanks for your response, > > > > I do not have PAE enabled... I've been hesitant of turning it on, I'm not > > sure if it's too stable, I noticed that the asr driver is in the nodriver > > list in the PAE kernel config file and I use the asr driver for my Adaptec > > 2015S raid card. If you think its safe to enable PAE with my current setup, > > please let me know, I do have 2 more gig's of ram in this particular box > > that I'd like to enable if it doesn't compromise system stability. > > > > The asr(4) driver will likely not operate correctly in a PAE > environment. There is no estimated time frame for fixing this either. > > Scott > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"