Ive got a Dlink DWL-G520 that Ive installed into a Freebsd system. Ive set up the card with the following ifconfig_ath0="inet 10.0.0.1 netmask 255.255.255.0 ssid daves channel 10 media DS11 mediaopt hostap"
This system was cvsuped and buildworld about 3 days ago. The card appears to be working because when I try to connect with my PDA it shows full Link and quality, and when I ifconfig ath0 down , the link and quality go down to nothing. However it doesnt give out dhcp addresses over this interface. Im sure my dhcpd.conf is fine because I've used a similar one on a laptop => aka wireless access point that worked very well. So I tried to use dstumbler to see if it could detect the PDA, however it gives me the following error error: unable to ioctl device socket: Operation now in progress and it stays that way. Has anyone had this issue as well or now what it means? Thanks David _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"