On Mon, 1 Sep 2003, Robert [unknown-8bit] Blacquière wrote:
> I don't seem to have these problems. I use xbattbar without problem.
Argh. How recent is your -current? I compile regularly, and I was up to
date as of this afternoon.
> I use this acpi_dsdt code: http://www.guldan.cistron.nl/acpi_dsdt.dsl
Thanks for the suggestion... I tried that one, but got the same error
about not enough memory to load the override file.
I attached a verbose dmesg, just in case someone wants to take a look.
Doug
--
This .signature sanitized for your protection
ified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1794188892 Hz
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz (1794.19-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536674304 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000503000 - 0x000000001f6aafff, 521830400 bytes (127400 pages)
avail memory = 515944448 (492 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fa000
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x3a2
pnpbios: Found PnP BIOS data at 0xc00f4330
pnpbios: Entry = f0000:435e Rev = 1.0
pnpbios: Event flag at f4356
pnpbios: OEM ID 4d00110e
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00
00 01 ff 01 00 01 19 01 00 01 2f 01 00 01 34 01
00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01
94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01
VESA: 60 mode(s) found
VESA: v2.0, 32704k memory, flags:0x1, mode table:0xc03f08e2 (1000022)
VESA: ATI MOBILITY RADEON 7500
VESA: ATI Technologies Inc. P7 01.00
ACPI: DSDT was overridden.
-0424: *** Error: UtAllocate: Could not allocate size 50204453
ACPI-0428: *** Error: Could not allocate table memory for [/*
R] length 50204453
ACPI-0368: *** Error: Could not copy override ACPI table, AE_NO_MEMORY
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ CPQ00B7 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 1 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 2 dev 6 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 2 dev 6 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
ACPI timer looks GOOD min = 4, max = 4, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz1: <thermal zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.C045.C0C2 irq 0: [ 5 10 11] low,level,sharable 0.31.0
\\_SB_.C045.C0C1 irq 11: [ 5 10 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
\\_SB_.C045.C0C2:
interrupts: 5 10 11
penalty: 110 110 210
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.C045.C0C2:
interrupts: 5 10 11
penalty: 110 110 210
references: 1
priority: 143
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.C045.C0C2 irq 10: [ 5 10 11] low,level,sharable 0.31.0
\\_SB_.C045.C0C1 irq 11: [ 5 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 60000000, size 28, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[14]: type 4, range 32, base 00000000, size 2, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[1c]: type 4, range 32, base 00000000, size 2, enabled
map[20]: type 4, range 32, base 00004440, size 4, enabled
pcib0: matched entry for 0.31.INTA (source \\_SB_.C045.C0C2)
pcib0: slot 31 INTA is routed to irq 10
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 4, range 32, base 00004000, size 8, enabled
map[14]: type 4, range 32, base 00004400, size 6, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.C045.C0C1)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
agp0: <Intel 82845 host to AGP bridge> mem 0x60000000-0x6fffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0x40400000-0x404fffff
pcib1: prefetched decode 0x48000000-0x4fffffff
---- initial configuration ------------------------
\\_SB_.C045.C0C0 irq 11: [ 5 10 11] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.C045.C0C0 irq 11: [ 5 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base 48000000, size 27, enabled
map[14]: type 4, range 32, base 00003000, size 8, enabled
map[18]: type 1, range 32, base 40400000, size 16, enabled
pcib1: matched entry for 1.0.INTA (source \\_SB_.C045.C0C0)
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x1002, dev=0x4c57, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0083, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 4
pcib2: I/O decode 0x2000-0x2fff
pcib2: memory decode 0x40000000-0x403fffff
pcib2: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.C045.C0C1 irq 11: [ 5 10 11] low,level,sharable 2.4.0
\\_SB_.C045.C0C2 irq 10: [ 5 10 11] low,level,sharable 2.4.1
\\_SB_.C045.C0C3 irq 11: [ 5 10 11] low,level,sharable 2.6.0
\\_SB_.C045.C0C4 irq 10: [ 5 10 11] low,level,sharable 2.8.0
\\_SB_.C045.C0C4 irq 10: [ 5 10 11] low,level,sharable 2.14.0
\\_SB_.C045.C0C4 irq 10: [ 5 10 11] low,level,sharable 2.14.1
\\_SB_.C045.C0C4 irq 10: [ 5 10 11] low,level,sharable 2.14.2
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.C045.C0C1 irq 11: [ 5 10 11] low,level,sharable 2.4.0
\\_SB_.C045.C0C2 irq 10: [ 5 10 11] low,level,sharable 2.4.1
\\_SB_.C045.C0C3 irq 11: [ 5 10 11] low,level,sharable 2.6.0
\\_SB_.C045.C0C4 irq 10: [ 5 10 11] low,level,sharable 2.8.0
\\_SB_.C045.C0C4 irq 10: [ 5 10 11] low,level,sharable 2.14.0
\\_SB_.C045.C0C4 irq 10: [ 5 10 11] low,level,sharable 2.14.1
\\_SB_.C045.C0C4 irq 10: [ 5 10 11] low,level,sharable 2.14.2
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base 40280000, size 8, enabled
map[14]: type 4, range 32, base 00002440, size 3, enabled
map[18]: type 4, range 32, base 00002000, size 8, enabled
pcib2: matched entry for 2.4.INTA (source \\_SB_.C045.C0C1)
pcib2: slot 4 INTA is routed to irq 11
found-> vendor=0x11c1, dev=0x0450, revid=0x02
bus=2, slot=4, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x42 (1980 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D3
map[10]: type 1, range 32, base 40000000, size 12, enabled
pcib2: matched entry for 2.6.INTA (source \\_SB_.C045.C0C3)
pcib2: slot 6 INTA is routed to irq 11
found-> vendor=0x104c, dev=0xac51, revid=0x00
bus=2, slot=6, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 40080000, size 12, enabled
found-> vendor=0x104c, dev=0xac51, revid=0x00
bus=2, slot=6, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0xc4 (49000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 40100000, size 12, enabled
map[14]: type 4, range 32, base 00002400, size 6, enabled
pcib2: matched entry for 2.8.INTA (source \\_SB_.C045.C0C4)
pcib2: slot 8 INTA is routed to irq 10
found-> vendor=0x8086, dev=0x1038, revid=0x42
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 40180000, size 12, enabled
pcib2: matched entry for 2.14.INTA (source \\_SB_.C045.C0C4)
pcib2: slot 14 INTA is routed to irq 10
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=2, slot=14, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 40200000, size 12, enabled
pcib2: matched entry for 2.14.INTB (source \\_SB_.C045.C0C4)
pcib2: slot 14 INTB is routed to irq 10
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=2, slot=14, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 40300000, size 8, enabled
pcib2: matched entry for 2.14.INTC (source \\_SB_.C045.C0C4)
pcib2: slot 14 INTC is routed to irq 10
found-> vendor=0x1033, dev=0x00e0, revid=0x02
bus=2, slot=14, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
pci2: <simple comms> at device 4.0 (no driver attached)
cbb0: <TI1420 PCI-CardBus Bridge> mem 0x40000000-0x40000fff irq 11 at device 6.0 on
pci2
pcib2: device cbb0 requested decoded memory range 0x40000000-0x40000fff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: PCI Configuration space:
0x00: 0xac51104c 0x02100007 0x06070000 0x00824208
0x10: 0x40000000 0x020000a0 0x20030302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b
0x40: 0x00b70e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x28449060 0x00000000 0x00000000 0x01001002
0x90: 0x60640280 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x0000001e 0x00000011
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1420 PCI-CardBus Bridge> mem 0x40080000-0x40080fff at device 6.1 on pci2
pcib2: device cbb1 requested decoded memory range 0x40080000-0x40080fff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.6.INTA (source \\_SB_.C045.C0C3)
pcib2: slot 6 INTA is routed to irq 11
cbb1: PCI Configuration space:
0x00: 0xac51104c 0x02100007 0x06070000 0x00824208
0x10: 0x40080000 0x020000a0 0x20040402 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010b
0x40: 0x00b70e11 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x28449060 0x00000000 0x00000000 0x01001002
0x90: 0x60640280 0x00000000 0x00000000 0x00000000
0xa0: 0xfe110001 0x00c00000 0x0000001e 0x00000011
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci2: <network, ethernet> at device 8.0 (no driver attached)
ohci0: <NEC uPD 9210 USB controller> mem 0x40180000-0x40180fff irq 10 at device 14.0
on pci2
pcib2: device ohci0 requested decoded memory range 0x40180000-0x40180fff
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ohci1: <NEC uPD 9210 USB controller> mem 0x40200000-0x40200fff irq 10 at device 14.1
on pci2
pcib2: device ohci1 requested decoded memory range 0x40200000-0x40200fff
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 14.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x4440-0x444f,0-0x3,0-0x7,0-0x3,0-0x7
irq 10 at device 31.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel ICH3 (82801CA)> port 0x4400-0x443f,0x4000-0x40ff irq 11 at device 31.5 on
pci0
pcm0: <Analog Devices AD1886A AC97 Codec (id = 0x41445363)>
pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: Primary codec extended features variable rate PCM, reserved 1
pcm0: sndbuf_setmap 6f2000, 4000; 0xe83f5000 -> 6f2000
pcm0: sndbuf_setmap 6f6000, 4000; 0xe83f9000 -> 6f6000
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
speaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x201 0x201 0x201 0x201
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 92 88 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83
b4 1f 00 4f 0d 0e 00 00 07 80 92 88 8f 28 1f 8f
b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1794188892 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_cmbat1: battery initialization start
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_tz0: _AC2: temperature 55.0 >= setpoint 15.9
acpi_tz0: _AC1: temperature 55.0 >= setpoint 55.0
acpi_tz0: switched from NONE to _AC1: 55.0C
ACPI-0331: *** Error: Cannot release Mutex [_GL_], not acquired
ACPI-1287: *** Error: Method execution failed [\\_SB_.C045.C059.C0E2.C12D] (Node
0xc401de80), AE_AML_MUTEX_NOT_ACQUIRED
ACPI-1287: *** Error: Method execution failed [\\_SB_.C045.C059.C0E2.C13F] (Node
0xc401dc60), AE_AML_MUTEX_NOT_ACQUIRED
ACPI-1287: *** Error: Method execution failed [\\_SB_.C045.C059.C0E2.C145] (Node
0xc401dbe0), AE_AML_MUTEX_NOT_ACQUIRED
ACPI-1287: *** Error: Method execution failed [\\_SB_.C045.C059.C0E2.C14C] (Node
0xc401db80), AE_AML_MUTEX_NOT_ACQUIRED
ACPI-1287: *** Error: Method execution failed [\\_SB_.C14C] (Node 0xc401f1e0),
AE_AML_MUTEX_NOT_ACQUIRED
ACPI-1287: *** Error: Method execution failed [\\_SB_.C198._BST] (Node
0xc4022120), AE_AML_MUTEX_NOT_ACQUIRED
acpi_cmbat0: battery status corrupted
ad0: setting UDMA100 on Intel ICH3 chip
ad0: <HITACHI_DK23EA-30/00K4A0A2> ATA-5 disk at ata0-master
ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:20487537
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:20487600 l:20971440
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:41459040 l:17146080
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 10489618944 end 10489651199
GEOM: Configure ad0s2, start 10489651200 length 10737377280 end 21227028479
GEOM: Configure ad0s3, start 21227028480 length 8778792960 end 30005821439
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=80pin
acd0: setting PIO4 on Intel ICH3 chip
acd0: <Compaq DVD-ROM SD-C2612/1A23> DVDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 192KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 47997 Hz, will use 48000 Hz
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 536870912 end 671088639
GEOM: Configure ad0s2c, start 0 length 10737377280 end 10737377279
GEOM: Configure ad0s2d, start 671088640 length 134217728 end 805306367
GEOM: Configure ad0s2e, start 805306368 length 268435456 end 1073741823
GEOM: Configure ad0s2f, start 1073741824 length 7516192768 end 8589934591
GEOM: Configure ad0s2g, start 8589934592 length 2147442688 end 10737377279
GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s3c, start 0 length 8778792960 end 8778792959
GEOM: Configure ad0s3e, start 134217728 length 134217728 end 268435455
GEOM: Configure ad0s3f, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s3g, start 536870912 length 8241922048 end 8778792959
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
fxp0: <Intel 82801CAM (ICH3) Pro/100 VM Ethernet> port 0x2400-0x243f mem
0x40100000-0x40100fff irq 10 at device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0x40100000-0x40100fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:08:02:96:01:06
fxp0: PCI IDs: 8086 1038 0e11 0098 0042
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
