On Mon, Sep 22, 2003 at 02:25:27PM +0000, Holger Kipp wrote: > > > Justin Smith ([EMAIL PROTECTED]) wrote: > >I'm running a P4 2.4 Ghz processor with 512meg of ram. > > > >I've had the problem of getting signal 11 and signal 4 when I make > >buildworld and buildkernel. > > > >I tested my system with memtest86 (for several hours) and it says > >everything is OK. > > We had similar problems once. It turned out to be a 'lucky' combination of good > mainboard and good memory that were slightly incompatible. > > memtest86 might not detect this, but make buildworld will. If you don't get the > errors at the same location every time, it might be the same issue. We found > out after contacting both the mainboard and the memory chip vendors.
Same experience here, also on P4, with DDR400 memory. Asus mainboard, with memory from the Asus qualified memory list. Did not work worth sh*, at least not with memory at DDR400 speeds. Other memory fixed is perfectly. Go figure.. -- Wilko [EMAIL PROTECTED] _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
