I haven't been able to boot a -current kernel since the ATAng import. They all die after (in a boot -v) a message from GEOM about creating ad0. If any further info would be helpful, just let me know what you need.
-- Michael McGoldrick: [EMAIL PROTECTED]
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #24: Sat Aug 23 16:42:47 BST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/URIEL Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc05bd000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc05bd1d0. Preloaded elf module "/boot/kernel.old/linux.ko" at 0xc05bd220. Preloaded elf module "/boot/kernel.old/ng_ubt.ko" at 0xc05bd2d0. Preloaded elf module "/boot/kernel.old/netgraph.ko" at 0xc05bd380. Preloaded elf module "/boot/kernel.old/acpi.ko" at 0xc05bd434. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (546.62-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134152192 (127 MB) avail memory = 123867136 (118 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <Acer M1615 > on motherboard ACPI-0981: *** Error: GPE0 block (GPE 0 to 15) overlaps the GPE1 block (GPE 10 to 25) - Ignoring GPE1 pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00f7900 acpi0: power button is handled as a fixed feature programming model. acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 2 INTA is routed to irq 10 pcib0: slot 11 INTA is routed to irq 5 pcib0: slot 19 INTA is routed to irq 10 pcib0: slot 20 INTB is routed to irq 10 pcib0: slot 20 INTC is routed to irq 11 pcib0: slot 20 INTD is routed to irq 5 pcib0: slot 20 INTA is routed to irq 9 agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 9 pcib1: slot 0 INTA is routed to irq 9 pci1: <display, VGA> at device 0.0 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x90800000-0x90800fff irq 10 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Atmel Standard USB Hub, class 9/0, rev 1.10/3.00, addr 2 uhub1: 4 ports with 4 removable, self powered umass0: PQI Travel Flash, rev 1.10/2.05, addr 3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 ums0: Microsoft Microsoft Wheel Mouse Optical\M-., rev 1.10/1.21, addr 4, iclass 3/1 ums0: 3 buttons and Z dir. isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0x90500000-0x905fffff,0x90400000-0x90400fff irq 5 at device 11.0 on pci0 csa: card is Unknown/invalid SSID (CS4614) pcm0: <CS461x PCM Audio> on csa0 pcm0: <Cirrus Logic CS4297 AC97 Codec> atapci0: <AcerLabs Aladdin UDMA33 controller> port 0x8400-0x840f at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 rl0: <RealTek 8139 10/100BaseTX, rev. B> port 0x8000-0x80ff mem 0x82103400-0x821034ff irq 10 at device 19.0 on pci0 rl0: Ethernet address: 00:60:67:76:6e:bf miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x82100000-0x82100fff irq 10 at device 20.0 on pci0 usb1: OHCI version 1.0, legacy support usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 usb1: USB revision 1.0 uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x82101000-0x82101fff irq 11 at device 20.1 on pci0 usb2: OHCI version 1.0, legacy support usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2 usb2: USB revision 1.0 uhub3: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ohci3: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x82102000-0x82102fff irq 5 at device 20.2 on pci0 usb3: OHCI version 1.0, legacy support usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci3 usb3: USB revision 1.0 uhub4: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0x82103000-0x821030ff irq 9 at device 20.3 on pci0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 ehci_pci_attach: companion usb3 usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub5: AcerLabs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub5: 6 ports with 6 removable, self powered atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 546618611 Hz quality 800 Timecounters tick every 10.000 msec ad0: 9768MB <ST310212A> [19846/16/63] at ata0-master UDMA33 ad2: 39266MB <IBM-DTLA-305040> [79780/16/63] at ata1-master UDMA33 acd0: DVD-ROM <LG DVD-ROM DRD-8120B> at ata0-slave PIO4 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device da1: 1.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <General Flash Disk Drive 2.05> Removable Direct Access SCSI-2 device da2: 1.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error (da1:umass-sim0:0:0:1): SCSI Status: Check Condition (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 (da1:umass-sim0:0:0:1): Medium not present (da1:umass-sim0:0:0:1): Unretryable error Opened disk da1 -> 6 (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error (da1:umass-sim0:0:0:1): SCSI Status: Check Condition (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 (da1:umass-sim0:0:0:1): Medium not present (da1:umass-sim0:0:0:1): Unretryable error Opened disk da1 -> 6 (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error (da2:umass-sim0:0:0:2): SCSI Status: Check Condition (da2:umass-sim0:0:0:2): NOT READY asc:3a,0 (da2:umass-sim0:0:0:2): Medium not present (da2:umass-sim0:0:0:2): Unretryable error Opened disk da2 -> 6 (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error (da2:umass-sim0:0:0:2): SCSI Status: Check Condition (da2:umass-sim0:0:0:2): NOT READY asc:3a,0 (da2:umass-sim0:0:0:2): Medium not present (da2:umass-sim0:0:0:2): Unretryable error Opened disk da2 -> 6 Mounting root from ufs:/dev/ad2s2a ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"