After some study of the bktr driver, it does a much more detailed probe than just by PCI ID. I would suggest following up to the list [EMAIL PROTECTED], and get the output of 'boot -v' since there is some matching info that is printed in that state. This info and boot -v should be enough to at least reprogram the probes to grab your card.
Sorry that this isn't easy :) Product ID 0x016c is kind of abnormal for other brooktree chips, usually they're in the 0x0350-0x0360 area. Its the right vendor code though. On Fri, 17 Oct 2003, bertrand kotewall wrote: > > Sorry about the unwrapped lines... > Here are the pertinent lines to the from pciconf -lv > [EMAIL PROTECTED]:9:0: class=0x040000 card=0xfd000070 chip=0x016c109e rev=0x11 > hdr=0x00 > vendor = 'Brooktree Corporation' > class = multimedia > subclass = video > [EMAIL PROTECTED]:9:1: class=0x048000 card=0xfd000070 chip=0x0878109e rev=0x11 > hdr=0x00 > vendor = 'Brooktree Corporation' > device = 'Bt878 Video Capture (Audio Section)' > class = multimedia > > Much much much obliged. > > Bertrand Kotewall > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "[EMAIL PROTECTED]" > -- Doug White | FreeBSD: The Power to Serve [EMAIL PROTECTED] | www.FreeBSD.org _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
