John Baldwin wrote:
On 06-Nov-2003 Peter Schultz wrote:
John Baldwin wrote:
On 05-Nov-2003 Peter Schultz wrote:
I have a Tyan S1832DL w/dual pii 350s and it's not able to boot. Seems
to be having trouble with my adaptec scsi controller, I get a whole
bunch of output like this hand transcribed bit, it comes after "waiting
15 seconds for scsi devices to settle":
ahc0 timeout SCB already complete interrupts may not be functioning
Infinite interrupt loop INTSTAT=0(probe3:ahc0:0:3:0): SCB 0x6 - timed out
Anyone else seeing this? There are probably 100+ related lines of
output, I'll have to configure serial debugging if you need to see it.
The dmesg output excluding all the ahc0 errors would help figure out
why your interrupts aren't working. However, I just committed a patch
that might fix your problem.
Now the kernel just dies and the machine reboots right in the beginning
when it's setting up the ACPI/APIC stuff. Of course, with ACPI off,
there's no apparent problem with the kernel.
Ok. Did the old kernel break before with ACPI turned off? It should
have. By the way, I've committed a fix for the ACPI breakage.
The "new interrupt" kernels I've built have worked fine with ACPI off.
The immediate crash is fixed, but now I'm back to the trouble with my
SCSI controller. I'll try to get the output from that to you.
Pete...
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"