I've been messing around for awhile, and I'm confused (go figure).
I've got an adaptec 1542 card using aha driver and RELENG_3 detects it no
problems.
If I use the adaptec on board utilities it finds my UMAX scanner no probs.
when I try to boot the machine hangs just after the waiting for scsi to
settle message.
So I've turned on cam debugging and get .... lots of iterations of
(probe0:aha0:0:0:0) ahaaction
(probe1:aha0:0:1:0) ahaaction
(probe2:aha0:0:2:0) ahaaction
(probe3:aha0:0:3:0) ahaaction
(probe4:aha0:0:4:0) ahaaction
(probe5:aha0:0:5:0) ahaaction
(probe6:aha0:0:6:0) ahaaction
and for a given probe
(probe0:aha0:0:0:0) camisr(probe0:aha0:0:0:0 ) ahaaction
(probe0:aha0:0:0:0) xpt_action
(probe0:aha0:0:0:0) INQUIRY. CDB 12 0 0 0 24 0
(probe0:aha0:0:0:0) xtp_setupccb
(probe0:aha0:0:0:0) xtp_action
(probe0:aha0:0:0:0) CCB 0xc5692508 - timeout
(probe0:aha0:0:0:0) CCB 0xc5692508 - timeout
(probe0:aha0:0:0:0) ahaaction
(probe0:aha0:0:0:0) camisr(probe0:aha0:0:0:0 ) probedone
(probe0:aha0:0:0:0) xpt_compile_path
(probe0:aha0:0:0:0) xpt_release_path
(probe0:aha0:0:0:0) xpt_done
aha0: No Longer in timeout
I've gabbed these as best as I can since the machine doesn't finish booting
so I can't grab a dmesg and I don't have a serial console.....
the kernel contains
controller aha0 at isa? port ? cam irq ?
controller scbus0 #base SCSI code
device da0 #SCSI direct access devices (aka disks)
device sa0 #SCSI tapes
device pass0 #CAM passthrough driver
Any thoughts .... comments ..... clues for the clueless .....
TIA Greg
--
Email: [EMAIL PROTECTED] Voice: +780 413 1910 Fax: +780 421 4929
#575 Sun Life Place * 10123 99 Street * Edmonton, AB * Canada * T5J 3H1
-- --
When things can't get any worse, they simplify themselves by getting a whole
lot worse then complicated. A complete and utter disaster is the simplest
thing in the world; it's preventing one that's complex. (Janet Morris)
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
