> On Wed, 8 Mar 2000, Leif Neland wrote: > > > I'm trying to use MS-VPN using poptop. (pptpd) > > > > It works nicely from home to my current at home, where both hosts are on the same >network, ,but not >> where the two hosts are on different networks. > > > > Followup: From work to current at home fails too: > > ppp.log says repeately: > > > > Mar 9 06:25:35 ns ppp[88344]: tun0: LCP: ACFCOMP[2] > > Mar 9 06:25:35 ns ppp[88344]: tun0: LCP: PROTOCOMP[2] > > Mar 9 06:25:35 ns ppp[88344]: tun0: LCP: ACCMAP[6] 0x00000000 > > Mar 9 06:25:35 ns ppp[88344]: tun0: LCP: MRU[4] 1500 > > Mar 9 06:25:35 ns ppp[88344]: tun0: LCP: MAGICNUM[6] 0x469c1c68 > > Mar 9 06:25:35 ns ppp[88344]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > Mar 9 06:25:35 ns ppp[88344]: tun0: LCP: deflink: State change Stopped --> >Req-Sent > > Mar 9 06:25:38 ns ppp[88344]: tun0: LCP: deflink: SendConfigReq(1) state = >Req-Sent > > Mar 9 06:25:38 ns ppp[88344]: tun0: LCP: ACFCOMP[2] > > Mar 9 06:25:38 ns ppp[88344]: tun0: LCP: PROTOCOMP[2] > > Mar 9 06:25:38 ns ppp[88344]: tun0: LCP: ACCMAP[6] 0x00000000 > > Mar 9 06:25:38 ns ppp[88344]: tun0: LCP: MRU[4] 1500 > > Mar 9 06:25:38 ns ppp[88344]: tun0: LCP: MAGICNUM[6] 0x469c1c68 > > Mar 9 06:25:38 ns ppp[88344]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > Mar 9 06:25:41 ns ppp[88344]: tun0: LCP: deflink: SendConfigReq(1) state = >Req-Sent > > > > The windows machine just says "Verifying username and password". > > > > > > default: set server 5431 qwerty set log Phase Chat Connect LCP IPCP CCP tun command tcp/ip set device /dev/cuaa0 set speed 115200 set redial 5+30-9999999 2 deny lqr set openmode active 2 pptp: enable chap enable proxy set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-hackers" in the body of the message