I was trying to install gnome from ports cvsup'd today and i kept getting
stuck when building guile. cc never crashed however it seemed to be stuck in
an infinite loop(i stopped it after about 2 hours). when i remove "-O -pipe"
from the qt makefile it seems to compile fine.
is this a compilier problem or something with the guile port?
PS. PLEASE reply to both the return address of this message and the
address: "[EMAIL PROTECTED]" It will be appreciated.
James ;)
more stuff:
here is some output (sorry about the long lines need to make this quick)
[root@jestocost gnome]# make install
===> Extracting for gnome-1.0.53
>> No MD5 checksum file.
===> gnome-1.0.53 depends on shared library: glib12.3 - found
===> gnome-1.0.53 depends on shared library: gtk12.2 - found
===> gnome-1.0.53 depends on shared library: ORBit.2 - found
===> gnome-1.0.53 depends on shared library: Imlib.5 - found
===> gnome-1.0.53 depends on shared library: audiofile.0 - found
===> gnome-1.0.53 depends on shared library: esd.2 - found
===> gnome-1.0.53 depends on shared library: gnome.3 - found
===> gnome-1.0.53 depends on shared library: gtop.1 - not found
===> Verifying install for gtop.1 in /usr/ports/devel/libgtop
===> Extracting for libgtop-1.0.7
>> Checksum OK for libgtop-1.0.7.tar.gz.
===> libgtop-1.0.7 depends on executable: gmake - found
===> libgtop-1.0.7 depends on executable: libtool - found
===> libgtop-1.0.7 depends on shared library: gnome.3 - found
===> libgtop-1.0.7 depends on shared library: guile.6 - not found
===> Verifying install for guile.6 in /usr/ports/lang/guile
===> Building for guile-1.3.4
Making all in ice-9
Making all in qt
Making all in md
Making all in time
/bin/sh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../libguile -O
-pipe -Wall -Wpointer-arith -Wmissing-prototypes -c qtmds.s
rm -f .libs/qtmds.lo
cc -DHAVE_CONFIG_H -I. -I. -I../libguile -O -pipe -Wall -Wpointer-arith
-Wmissing-prototypes -c qtmds.s -fPIC -DPIC -o .libs/qtmds.lo
*** dies here ***
[root@jestocost /root]# dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-STABLE #0: Tue Mar 28 16:38:17 EST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/CS_JESTO_KRNL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 232881891 Hz
CPU: Pentium/P55C (232.88-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 62390272 (60928K bytes)
Preloaded elf kernel "kernel" at 0xc02af000.
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 9 on pci0.8.0
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 11 on pci0.20.0
fxp0: Ethernet address 00:a0:c9:e3:2b:c0
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
... try to identify the yamaha
pcm0 at 0x530 irq 5 drq 0 flags 0xc111 on isa
mss_attach <mss>0 at 0x530 irq 5 dma 0:1 flags 0xc111
setting up yamaha registers
set yamaha master volume to max
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model IntelliMouse, device ID 3
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST33221A>
wd0: 3077MB (6303024 sectors), 6253 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <LTN301/MP08>, removable, intr, dma, iordis
acd0: drive speed 5511KB/sec, 120KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
npx0 on motherboard
npx0: INT 16 interface
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
Intel Pentium detected, installing workaround for F00F bug
changing root device to wd0s1a
[root@jestocost /root]# cc -v
gcc version 2.7.2.3
thanks for any info.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message