what do you mean by ribbon cables, aren't the cables that came with the
motherboard
good for it?
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Joey Miller
Sent: Sat, July 01, 2000 10:04 PM
To: Mustafa Deeb
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: Invalidating PACK!!!
had the same problems. make sure you are using LVD ribbon cables.
On Sat, Jul 01, 2000 at 11:11:47AM +0200, Mustafa Deeb wrote:
// hi all,
//
// we build our own servers, we've always used the intel N440BX and the
// Barracuda disks.. and we liked it so much,
// this time we bought intel's L440GX+ and the chettah disks from seagate
// (Ultra2 DIsks)
// and I'm getting these errors,
// ofcourse the server goes nuts when an error like this happens..
// after looking into the mailling lists, nobody gave a direct reason for
this
// problem or even a solution, anyways, I want to replace the Hard Drives,
//
// is there someone who've used the L440GX+ motherboard with 18G disks and
he
// is happy with it
//
// Best Regards...
// Mustafa N. Deeb
//
//
//
// da0 at ahc0 bus 0 target 1 lun 0
// da0: <SEAGATE ST318404LW 0002> Fixed Direct Access SCSI-3 device
// da0: 20.000MB/s transfers (10.000MHz, offset 63, 16bit), Tagged Queueing
// Enabled
// da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
// da2 at ahc0 bus 0 target 4 lun 0
// da2: <SEAGATE ST318404LW 0002> Fixed Direct Access SCSI-3 device
// da2: 20.000MB/s transfers (10.000MHz, offset 63, 16bit), Tagged Queueing
// Enabled
// da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
// da1 at ahc0 bus 0 target 2 lun 0
// da1: <SEAGATE ST318404LW 0002> Fixed Direct Access SCSI-3 device
// da1: 20.000MB/s transfers (10.000MHz, offset 63, 16bit), Tagged Queueing
// Enabled
// da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
//
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): SCB 0x62 - timed out while idle, SEQADDR == 0xb
// (da2:ahc0:0:4:0): Queuing a BDR SCB
// (da2:ahc0:0:4:0): no longer in timeout, status = 34a
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): Invalidating pack
// (da2:ahc0:0:4:0): SCB 0xc - timed out while idle, SEQADDR == 0x9
// (da2:ahc0:0:4:0): Queuing a BDR SCB
// (da2:ahc0:0:4:0): no longer in timeout, status = 34a
// (da2:ahc0:0:4:0): Invalidating pack
//
//
//
// To Unsubscribe: send mail to [EMAIL PROTECTED]
// with "unsubscribe freebsd-isp" in the body of the message
--
Joey Miller
Sr. Systems Engineer
iBIZ Technology Corp.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message