Greg Lehey wrote:
> On Friday, 18 June 1999 at 13:45:42 -0600, Wes Peters wrote:
> > Greg Lehey wrote:
> >>
> >> I've been away from work for several weeks, and I now find that I can
> >> no longer start remote serial gdb. I am using sio0 on the debugged
> >> machine side, and sio1 on the debugging machine side. Here are the
> >> relevant dmesg outputs:
> >>
> >> [...]
> >
> > I think you need flags 0x50 (instead of 0x90) on panic. From sio(4):
> >
> > [...]
>
> In fact, it was all OK. The serial port seems to be flaky. It works
> OK at 9600 bps, but drops characters at 38400. I'm still
> investigating whether this is hardware or software: it seems to work
> fine in normal mode, but when it's in serial debug mode it can often
> drop two characters at a time, and there's no overrun indication.
Ick. Is this a port on the motherboard? I'd try a known good card
if you have one about.
--
"Where am I, and what am I doing in this handbasket?"
Wes Peters Softweyr LLC
http://www.softweyr.com/~softweyr [email protected]
To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-hackers" in the body of the message
