I've been messing around for awhile, and I'm confused (go figure). I've got an adaptec 1542 card using aha driver and RELENG_3 detects it no problems.
If I use the adaptec on board utilities it finds my UMAX scanner no probs. when I try to boot the machine hangs just after the waiting for scsi to settle message. So I've turned on cam debugging and get .... lots of iterations of (probe0:aha0:0:0:0) ahaaction (probe1:aha0:0:1:0) ahaaction (probe2:aha0:0:2:0) ahaaction (probe3:aha0:0:3:0) ahaaction (probe4:aha0:0:4:0) ahaaction (probe5:aha0:0:5:0) ahaaction (probe6:aha0:0:6:0) ahaaction and for a given probe (probe0:aha0:0:0:0) camisr(probe0:aha0:0:0:0 ) ahaaction (probe0:aha0:0:0:0) xpt_action (probe0:aha0:0:0:0) INQUIRY. CDB 12 0 0 0 24 0 (probe0:aha0:0:0:0) xtp_setupccb (probe0:aha0:0:0:0) xtp_action (probe0:aha0:0:0:0) CCB 0xc5692508 - timeout (probe0:aha0:0:0:0) CCB 0xc5692508 - timeout (probe0:aha0:0:0:0) ahaaction (probe0:aha0:0:0:0) camisr(probe0:aha0:0:0:0 ) probedone (probe0:aha0:0:0:0) xpt_compile_path (probe0:aha0:0:0:0) xpt_release_path (probe0:aha0:0:0:0) xpt_done aha0: No Longer in timeout I've gabbed these as best as I can since the machine doesn't finish booting so I can't grab a dmesg and I don't have a serial console..... the kernel contains controller aha0 at isa? port ? cam irq ? controller scbus0 #base SCSI code device da0 #SCSI direct access devices (aka disks) device sa0 #SCSI tapes device pass0 #CAM passthrough driver Any thoughts .... comments ..... clues for the clueless ..... TIA Greg -- Email: ska...@worldgate.com Voice: +780 413 1910 Fax: +780 421 4929 #575 Sun Life Place * 10123 99 Street * Edmonton, AB * Canada * T5J 3H1 -- -- When things can't get any worse, they simplify themselves by getting a whole lot worse then complicated. A complete and utter disaster is the simplest thing in the world; it's preventing one that's complex. (Janet Morris) To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-hackers" in the body of the message