How can I tell if the Northbridge on a machine has a built-in DMA
controller? And if it does, what device would I use to control it?
I ask because I'm working with a PCI card that has a 36-bit physical
address limit, and that means bounce buffers when using more than 64GB
of memory. I'd prefer not to use bounce buffers, and since the card's
memory that I'm using is mapped into the physical space of the FreeBSD
host, the entire address space of the card that I care about is
available to FreeBSD. So while pio to the card's memory is too slow
to be useful, if there was a way to use a DMA controller on the
motherboard to get data into and out of the card, that may be
preferable to using the card's DMAC with the limited address space.
But all that's just theory -- I have no idea how to tell whether the
mobo has a DMAC, and if it does, how to control it. Help? :-)
Attached is the boot dmesg; I can also run pciconf commands, etc., to
help out with figuring out what I have.
Thanks,
matthew
Copyright (c) 2001-2011 Isilon Systems LLC. All rights reserved.
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
Isilon OneFS vHEAD B_7466(DEBUG): 0x605010E001D2A00: Sat Mar 19 12:02:12 GMT
2011
root@mdf-rnv-1:/data/sb/head/obj/data/sb/head/src/sys/IQ.amd64.debug amd64
WARNING: WITNESS option enabled, expect reduced performance.
Isilon: model 44 family 6 stepping 2; highmem enabled.
MEMGUARD DEBUGGING ALLOCATOR INITIALIZED:
MEMGUARD map base: 0xffffff8000400000
MEMGUARD map limit: 0xffffff87ae548000
MEMGUARD map size: 32212256 KBytes
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.02-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206c2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
usable memory = 25647685632 (24459 MB)
fix_tunable(): returning 65536 for tunable "nbuf", mem = 25769803776
fix_tunable(): returning 65536 for tunable "nbuf", mem = 25769803776
avail memory = 24562372608 (23424 MB)
fix_tunable(): returning 67108864 for tunable "hirunningspace", mem =
25769803776
fix_tunable(): returning 66060288 for tunable "lorunningspace", mem =
25769803776
fix_tunable(): returning 10000 for tunable "lodirtybuffers", mem = 25769803776
fix_tunable(): returning 10250 for tunable "hidirtybuffers", mem = 25769803776
fix_tunable(): returning 2562 for tunable "dirtybufthresh", mem = 25769803776
ACPI APIC Table: <092110 APIC2013>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 18
cpu3 (AP): APIC ID: 20
cpu4 (AP): APIC ID: 32
cpu5 (AP): APIC ID: 34
cpu6 (AP): APIC ID: 50
cpu7 (AP): APIC ID: 52
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
registered firmware set <isp_1040>
registered firmware set <isp_1040_it>
registered firmware set <isp_1080>
registered firmware set <isp_1080_it>
registered firmware set <isp_12160>
registered firmware set <isp_12160_it>
registered firmware set <isp_2100>
registered firmware set <isp_2200>
registered firmware set <isp_2300>
registered firmware set <isp_2322>
registered firmware set <isp_2400>
imdd0-9: Isilon Mirrored Disk Driver
Fibre Channel Device Manager (fcdm) is loaded
acpi0: <NEC > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci9: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci8: <ACPI PCI bus> on pcib2
pci8: <serial bus> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci7: <ACPI PCI bus> on pcib3
cxgbc0: <Chelsio T320, 2 ports> mem 0xfae7e000-0xfae7efff,0xfae7f000-0xfae7ffff
irq 26 at device 0.0 on pci7
cxgbc0: SFP module vendor is FINISAR CORP.
cxgbc0: SFP part number is FTLX8571D3BCL
cxgbc0: ael2005 phy: modtype:1
cxgbc0: SFP module vendor is FINISAR CORP.
cxgbc0: SFP part number is FTLX8571D3BCL
cxgbc0: ael2005 phy: modtype:1
cxgbc0: using MSI-X interrupts (9 vectors)
cxgb0: <Port 0 10GBASE-R> on cxgbc0
cxgb0: Ethernet address: 00:07:43:06:d1:39
cxgb1: <Port 1 10GBASE-R> on cxgbc0
cxgb1: Ethernet address: 00:07:43:06:d1:3a
cxgbc0: Firmware Version 7.8.0
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci6: <ACPI PCI bus> on pcib4
rnv0: rnv_pci_probe: #411: Found NVRAM device:Isilon NVRAM (RNV-512 MB) PCIe
/4 block size:200 Subsystem DID:0x21 VID:0x4953
rnv0: <Isilon NVRAM (RNV-512 MB) PCIe /4> mem
0xfa700000-0xfa7fffff,0xfa800000-0xfabfffff,0xc0000000-0xdfffffff irq 30 at
device 0.0 on pci6
rnv0: [ITHREAD]
rnv0: rnv_soc_int_enable: #600: MSIR0 was selected for FW command completion
interrupts, mask:(0x1)
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
mps0: <LSI SAS2008> port 0xe000-0xe0ff mem
0xfad3c000-0xfad3ffff,0xfad40000-0xfad7ffff irq 32 at device 0.0 on pci5
mps0: Firmware: 07.00.00.00
mps0: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
mps0: enabling unmapped io
mps0: mpssas_startup_increment freezing simq
isi_sim_init mps0
mps0: [ITHREAD]
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver
attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xbe80-0xbe9f irq 16 at device 26.0
on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xbe20-0xbe3f irq 21 at device 26.1
on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbdc0-0xbddf irq 19 at device 26.2
on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfacfa000-0xfacfa3ff irq 18 at
device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xcf80-0xcf9f mem
0xfa5e0000-0xfa5fffff,0xfa5dc000-0xfa5dffff irq 16 at device 0.0 on pci3
em0: Using MSIX interrupts
em0: em_flow_control_tunable is: 0 and em_flow_control_sysctl is 0
em0: Disabling hardware flow control
em0: [ITHREAD]
em0: [ITHREAD]
em0: [ITHREAD]
em0: Ethernet address: 00:30:48:dd:04:52
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib8
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xdf80-0xdf9f mem
0xfa6e0000-0xfa6fffff,0xfa6dc000-0xfa6dffff irq 17 at device 0.0 on pci4
em1: Using MSIX interrupts
em1: em_flow_control_tunable is: 0 and em_flow_control_sysctl is 0
em1: Disabling hardware flow control
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: Ethernet address: 00:30:48:dd:04:53
uhci3: <UHCI (generic) USB controller> port 0xbf00-0xbf1f irq 23 at device 29.0
on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xbec0-0xbedf irq 19 at device 29.1
on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xbea0-0xbebf irq 18 at device 29.2
on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfacfc000-0xfacfc3ff irq 23 at
device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib9
vgapci0: <VGA-compatible display> mem
0xf7000000-0xf7ffffff,0xf97fc000-0xf97fffff,0xf9800000-0xf9ffffff irq 16 at
device 3.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ICH10 SATA300 controller> port
0xbff0-0xbff7,0xbf8c-0xbf8f,0xbfe0-0xbfe7,0xbf88-0xbf8b,0xbfa0-0xbfaf,0xbf90-0xbf9f
irq 19 at device 31.2 on pci0
atapci0: [GIANT-LOCKED]
atapci0: [ITHREAD]
ata2: channel #0 on atapci0
ata2: [GIANT-LOCKED]
ata2: [ITHREAD]
ata3: channel #1 on atapci0
ata3: [GIANT-LOCKED]
ata3: [ITHREAD]
isi_i2c: found Intel ICH10 SMBus Controller
isi_i2c0 port 0x400-0x41f mem 0xfacfe000-0xfacfe0ff irq 18 at device 31.3 on
pci0
isi_i2c0: [GIANT-LOCKED]
isi_i2c0: [ITHREAD]
atapci1: <ICH10 SATA300 controller> port
0xbf80-0xbf87,0xbf7c-0xbf7f,0xbf28-0xbf2f,0xbf24-0xbf27,0xbf60-0xbf6f,0xbf30-0xbf3f
irq 19 at device 31.5 on pci0
atapci1: [GIANT-LOCKED]
atapci1: [ITHREAD]
ata4: channel #0 on atapci1
ata4: [GIANT-LOCKED]
ata4: [ITHREAD]
ata5: channel #1 on atapci1
ata5: [GIANT-LOCKED]
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x90 on acpi0
sio0: type 16550A, console
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio2: <16550A-compatible COM port> port 0x3e8-0x3ef irq 5 on acpi0
sio2: type 16550A
sio2: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 91, should
be 8E [20070320]
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cryptosoft0: <software crypto> on motherboard
qpi0: <QPI system bus> on motherboard
pcib10: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci254: <PCI bus> on pcib10
pcib11: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib11
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [GIANT-LOCKED]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [GIANT-LOCKED]
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fix_tunable(): returning 1500000 for tunable "desiredvnodes", mem = 25769803776
fix_tunable(): returning 1500000 for tunable "wantfreevnodes", mem = 25769803776
fix_tunable(): returning 384000 for tunable "mds_block_lazy_locks", mem =
25769803776
sel: loaded
Timecounters tick every 10.000 msec
ad4: lun 4 -> (phys) unit 0
iosched_init: iosched inited
ad4: lun 4 -> (phys) unit 0
ad4: <SanDisk SSD P4 8GB/SSD 8.00, SN:10333330, 7641MB SATA150> on ata2-master
ad7: lun 7 -> (phys) unit 1
ad7: lun 7 -> (phys) unit 1
ad7: <SanDisk SSD P4 8GB/SSD 8.00, SN:10333330, 7641MB SATA150> on ata3-slave
mps0: mps_send_portenable
mps0: target 0 handle 0 changed linkrate from 0x0 to 0x0, status 0x3
mps0: target 0 handle 0 changed linkrate from 0x0 to 0x0, status 0x3
mps0: target 0 handle 0 changed linkrate from 0x0 to 0x0, status 0x3
mps0: target 0 handle 0 changed linkrate from 0x0 to 0x0, status 0x3
mps0: target 0 handle 0 changed linkrate from 0x0 to 0x0, status 0x3
mps0: LSI expander detected
mps0: Assigned target id 120 to <b0510150bf000000/500151b0000000bf>
mps0: Found device <1902<SmpTarg,Direct,LsiDev>,Edge Expander> <6.0Gbps>
<0x0009> <2/0> <1/0> <b0510150bf000000/500151b0000000bf>
mps0: Assigned target id 10 to <c50050451ef22b/5000c5002bf21e45>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0010> <0/0> <9/10>
<00c50050451ef22b/5000c5002bf21e45>
mps0: Assigned target id 11 to <c500505d8e1b1b/5000c5001b1b8e5d>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0011> <0/0> <9/11>
<00c500505d8e1b1b/5000c5001b1b8e5d>
mps0: Assigned target id 12 to <c50050cd55f12b/5000c5002bf155cd>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0012> <0/0> <9/12>
<00c50050cd55f12b/5000c5002bf155cd>
mps0: Assigned target id 13 to <c50050cd1af22b/5000c5002bf21acd>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0013> <0/0> <9/13>
<00c50050cd1af22b/5000c5002bf21acd>
mps0: Assigned target id 14 to <c500509920f22b/5000c5002bf22099>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0014> <0/0> <9/14>
<00c500509920f22b/5000c5002bf22099>
mps0: Assigned target id 15 to <c500508520f22b/5000c5002bf22085>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0015> <0/0> <9/15>
<00c500508520f22b/5000c5002bf22085>
mps0: Assigned target id 16 to <c50050fd941b1b/5000c5001b1b94fd>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0016> <0/0> <9/16>
<00c50050fd941b1b/5000c5001b1b94fd>
mps0: Assigned target id 17 to <c500509955201b/5000c5001b205599>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0017> <0/0> <9/17>
<00c500509955201b/5000c5001b205599>
mps0: Assigned target id 18 to <c50050b904f22b/5000c5002bf204b9>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0018> <0/0> <9/18>
<00c50050b904f22b/5000c5002bf204b9>
mps0: Assigned target id 19 to <c50050b566ec2b/5000c5002bec66b5>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0019> <0/0> <9/19>
<00c50050b566ec2b/5000c5002bec66b5>
mps0: Assigned target id 20 to <c500507966ec2b/5000c5002bec6679>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x001a> <0/0> <9/20>
<00c500507966ec2b/5000c5002bec6679>
mps0: Assigned target id 21 to <c50050b18af12b/5000c5002bf18ab1>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x001b> <0/0> <9/21>
<00c50050b18af12b/5000c5002bf18ab1>
mps0: Assigned target id 22 to <c500501166ec2b/5000c5002bec6611>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x001c> <0/0> <9/22>
<00c500501166ec2b/5000c5002bec6611>
mps0: Assigned target id 23 to <c50050d51af22b/5000c5002bf21ad5>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x001d> <0/0> <9/23>
<00c50050d51af22b/5000c5002bf21ad5>
mps0: Assigned target id 24 to <c5005071d9f12b/5000c5002bf1d971>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x001e> <0/0> <9/24>
<00c5005071d9f12b/5000c5002bf1d971>
mps0: Assigned target id 25 to <c500505120f22b/5000c5002bf22051>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x001f> <0/0> <9/25>
<00c500505120f22b/5000c5002bf22051>
mps0: Assigned target id 26 to <c50050e15cf12b/5000c5002bf15ce1>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0020> <0/0> <9/26>
<00c50050e15cf12b/5000c5002bf15ce1>
mps0: Assigned target id 27 to <c50050851ef22b/5000c5002bf21e85>
mps0: Found device <401<SspTarg>,End Device> <6.0Gbps> <0x0021> <0/0> <9/27>
<00c50050851ef22b/5000c5002bf21e85>
mps0: Assigned target id 100 to <b0510150bd000000/500151b0000000bd>
mps0: Found device <4451<SmpInit,SspInit,SspTarg,SepDev>,End Device> <6.0Gbps>
<0x0022> <2/0> <9/36> <b0510150bd000000/500151b0000000bd>
isi_sim_add_disk sim mps0 target 10 exp 9 phy 10 path 0
isi_sim_add_disk sim mps0 target 11 exp 9 phy 11 path 0
isi_sim_add_disk sim mps0 target 12 exp 9 phy 12 path 0
isi_sim_add_disk sim mps0 target 13 exp 9 phy 13 path 0
isi_sim_add_disk sim mps0 target 14 exp 9 phy 14 path 0
isi_sim_add_disk sim mps0 target 15 exp 9 phy 15 path 0
isi_sim_add_disk sim mps0 target 16 exp 9 phy 16 path 0
isi_sim_add_disk sim mps0 target 17 exp 9 phy 17 path 0
isi_sim_add_disk sim mps0 target 18 exp 9 phy 18 path 0
isi_sim_add_disk sim mps0 target 19 exp 9 phy 19 path 0
isi_sim_add_disk sim mps0 target 20 exp 9 phy 20 path 0
isi_sim_add_disk sim mps0 target 21 exp 9 phy 21 path 0
isi_sim_add_disk sim mps0 target 22 exp 9 phy 22 path 0
isi_sim_add_disk sim mps0 target 23 exp 9 phy 23 path 0
isi_sim_add_disk sim mps0 target 24 exp 9 phy 24 path 0
isi_sim_add_disk sim mps0 target 25 exp 9 phy 25 path 0
isi_sim_add_disk sim mps0 target 26 exp 9 phy 26 path 0
isi_sim_add_disk sim mps0 target 27 exp 9 phy 27 path 0
isi_sim_add_disk sim mps0 target 100 exp 9 phy 36 path 0
mps0: Assigned target id 4 to <a7205000daf43001/500151b000000084>
mps0: Found device <81<SataDev>,End Device> <1.5Gbps> <0x000a> <0/0> <9/4>
<a7205000daf43001/500151b000000084>
isi_sim_add_disk sim mps0 target 4 exp 9 phy 4 path 0
mps0: Assigned target id 5 to <a7205000db773001/500151b000000085>
mps0: Found device <81<SataDev>,End Device> <1.5Gbps> <0x000b> <0/0> <9/5>
<a7205000db773001/500151b000000085>
mps0: Assigned target id 6 to <a7205000db453001/500151b000000086>
mps0: Found device <81<SataDev>,End Device> <1.5Gbps> <0x000c> <0/0> <9/6>
<a7205000db453001/500151b000000086>
mps0: Assigned target id 7 to <a7205000db6d3001/500151b000000087>
mps0: Found device <81<SataDev>,End Device> <1.5Gbps> <0x000d> <0/0> <9/7>
<a7205000db6d3001/500151b000000087>
mps0: Assigned target id 8 to <a7205000db443001/500151b000000088>
mps0: Found device <81<SataDev>,End Device> <1.5Gbps> <0x000e> <0/0> <9/8>
<a7205000db443001/500151b000000088>
mps0: Assigned target id 9 to <a7205000db623001/500151b000000089>
mps0: Found device <81<SataDev>,End Device> <1.5Gbps> <0x000f> <0/0> <9/9>
<a7205000db623001/500151b000000089>
mps0: mpssas_startup_decrement releasing simq
isi_sim_add_disk sim mps0 target 5 exp 9 phy 5 path 0
isi_sim_add_disk sim mps0 target 6 exp 9 phy 6 path 0
isi_sim_add_disk sim mps0 target 7 exp 9 phy 7 path 0
isi_sim_add_disk sim mps0 target 8 exp 9 phy 8 path 0
isi_sim_add_disk sim mps0 target 9 exp 9 phy 9 path 0
ndmp_sa: version 20090116
ses0 at mps0 bus 0 target 100 lun 0
ses0: <Isilon SAS2X36 0600> Fixed Enclosure Services SCSI-5 device
ses0: 600.000MB/s transfers
ses0: SCSI-3 SES Device
da1 at mps0 bus 0 target 4 lun 0
da1: <ATA STEC MACH8 IO 2269> Fixed Direct Access SCSI-5 device
da1: 150.000MB/s transfers
da1: Command Queueing Enabled
da1: 95396MB (195371568 blks)
da2 at mps0 bus 0 target 5 lun 0
da2: <ATA STEC MACH8 IO 2269> Fixed Direct Access SCSI-5 device
da2: 150.000MB/s transfers
da2: Command Queueing Enabled
da2: 95396MB (195371568 blks)
da3 at mps0 bus 0 target 6 lun 0
da3: <ATA STEC MACH8 IO 2269> Fixed Direct Access SCSI-5 device
da3: 150.000MB/s transfers
da3: Command Queueing Enabled
da3: 95396MB (195371568 blks)
da4 at mps0 bus 0 target 7 lun 0
da4: <ATA STEC MACH8 IO 2269> Fixed Direct Access SCSI-5 device
da4: 150.000MB/s transfers
da4: Command Queueing Enabled
da4: 95396MB (195371568 blks)
da5 at mps0 bus 0 target 8 lun 0
da5: <ATA STEC MACH8 IO 2269> Fixed Direct Access SCSI-5 device
da5: 150.000MB/s transfers
da5: Command Queueing Enabled
da5: 95396MB (195371568 blks)
da6 at mps0 bus 0 target 9 lun 0
da6: <ATA STEC MACH8 IO 2269> Fixed Direct Access SCSI-5 device
da6: 150.000MB/s transfers
da6: Command Queueing Enabled
da6: 95396MB (195371568 blks)
da7 at mps0 bus 0 target 10 lun 0
da7: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da7: 600.000MB/s transfers
da7: Command Queueing Enabled
da7: 286102MB (585937500 blks)
da8 at mps0 bus 0 target 11 lun 0
da8: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da8: 600.000MB/s transfers
da8: Command Queueing Enabled
da8: 286102MB (585937500 blks)
da9 at mps0 bus 0 target 12 lun 0
da9: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da9: 600.000MB/s transfers
da9: Command Queueing Enabled
da9: 286102MB (585937500 blks)
da10 at mps0 bus 0 target 13 lun 0
da10: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da10: 600.000MB/s transfers
da10: Command Queueing Enabled
da10: 286102MB (585937500 blks)
da11 at mps0 bus 0 target 14 lun 0
da11: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da11: 600.000MB/s transfers
da11: Command Queueing Enabled
da11: 286102MB (585937500 blks)
da12 at mps0 bus 0 target 15 lun 0
da12: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da12: 600.000MB/s transfers
da12: Command Queueing Enabled
da12: 286102MB (585937500 blks)
da13 at mps0 bus 0 target 16 lun 0
da13: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da13: 600.000MB/s transfers
da13: Command Queueing Enabled
da13: 286102MB (585937500 blks)
da14 at mps0 bus 0 target 17 lun 0
da14: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da14: 600.000MB/s transfers
da14: Command Queueing Enabled
da14: 286102MB (585937500 blks)
da15 at mps0 bus 0 target 18 lun 0
da15: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da15: 600.000MB/s transfers
da15: Command Queueing Enabled
da15: 286102MB (585937500 blks)
da16 at mps0 bus 0 target 19 lun 0
da16: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da16: 600.000MB/s transfers
da16: Command Queueing Enabled
da16: 286102MB (585937500 blks)
da17 at mps0 bus 0 target 20 lun 0
da17: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da17: 600.000MB/s transfers
da17: Command Queueing Enabled
da17: 286102MB (585937500 blks)
da18 at mps0 bus 0 target 21 lun 0
da18: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da18: 600.000MB/s transfers
da18: Command Queueing Enabled
da18: 286102MB (585937500 blks)
da19 at mps0 bus 0 target 22 lun 0
da19: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da19: 600.000MB/s transfers
da19: Command Queueing Enabled
da19: 286102MB (585937500 blks)
da20 at mps0 bus 0 target 23 lun 0
da20: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da20: 600.000MB/s transfers
da20: Command Queueing Enabled
da20: 286102MB (585937500 blks)
da21 at mps0 bus 0 target 24 lun 0
da21: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da21: 600.000MB/s transfers
da21: Command Queueing Enabled
da21: 286102MB (585937500 blks)
da22 at mps0 bus 0 target 25 lun 0
da22: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da22: 600.000MB/s transfers
da22: Command Queueing Enabled
da22: 286102MB (585937500 blks)
da23 at mps0 bus 0 target 26 lun 0
da23: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da23: 600.000MB/s transfers
da23: Command Queueing Enabled
da23: 286102MB (585937500 blks)
da24 at mps0 bus 0 target 27 lun 0
da24: <SEAGATE ST9300603SS 0006> Fixed Direct Access SCSI-5 device
da24: 600.000MB/s transfers
da24: Command Queueing Enabled
da24: 286102MB (585937500 blks)
mps0: mps_startup_complete
mps0: disestablish config intrhook
Initializing compression for panic dumps.
SMP: AP CPU #3 Launched!
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x206c2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
SMP: AP CPU #1 Launched!
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x206c2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
SMP: AP CPU #6 Launched!
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x206c2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
SMP: AP CPU #2 Launched!
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x206c2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
SMP: AP CPU #4 Launched!
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x206c2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
SMP: AP CPU #7 Launched!
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x206c2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
SMP: AP CPU #5 Launched!
CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2394.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x206c2 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
WARNING: WITNESS option enabled, expect reduced performance.
Running mlx4_ib_init (0xffffffff82a73b00)
Running mlx4_init (0xffffffff82958270)
currdev=disk0p4:
mlx40: <mlx4> mem 0xfaf00000-0xfaffffff,0xf8800000-0xf8ffffff irq 24 at device
0.0 on pci8
Info:mlx4_core: Mellanox ConnectX core driver v1.0-ofed1.5.1 (April 4, 2008)
Info:mlx4_core: Initializing mlx4
mlx40: [ITHREAD]
mlx40: [ITHREAD]
Info:mlx4_ib: Mellanox ConnectX InfiniBand driver v1.0-ofed1.5.1 (April 4, 2008)
Debug:HW node_desc: MT25408 ConnectX Mellanox Technologies
Info:node_desc: IsilonIQ vHEAD - - B_7466(DEBUG)
GEOM_MIRROR: Device mirror/root1 launched (2/2).
Trying to mount root from ufs:/dev/mirror/root1
ib0: WARNING: using obsoleted if_watchdog interface
ib1: WARNING: using obsoleted if_watchdog interface
GEOM_MIRROR: Device mirror/var-crash launched (1/1).
GEOM_MIRROR: Device mirror/mfg launched (2/2).
GEOM_MIRROR: Device mirror/journal-backup launched (2/2).
GEOM_MIRROR: Device mirror/var1 launched (2/2).
GEOM_MIRROR: Device mirror/var0 launched (2/2).
GEOM_MIRROR: Device mirror/root0 launched (2/2).
cxgbc0: [ITHREAD]
cxgbc0: [ITHREAD]
cxgbc0: [ITHREAD]
cxgbc0: [ITHREAD]
cxgbc0: [ITHREAD]
cxgbc0: [ITHREAD]
cxgbc0: [ITHREAD]
cxgbc0: [ITHREAD]
cxgbc0: [ITHREAD]
cxgbc0: starting thread for 0
cxgbc0: starting thread for 4
error = 0
change to celog iid base 0 -> 70368744181558 (1:3894)
em0: em_flow_control_tunable is: 0 and em_flow_control_sysctl is 0
em0: Disabling hardware flow control
em0: link state changed to DOWN
em1: em_flow_control_tunable is: 0 and em_flow_control_sysctl is 0
em1: Disabling hardware flow control
em1: link state changed to DOWN
em0: link state changed to UP
em1: link state changed to UP
mlx4_0: port 2 link is down
mlx4_0: port 2 link is up
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
