In that case it might be that they are using some kind of private
command to set the SCSI subsequently to different IDs.
I'll check whether I have the device here and if so, I will try and
snoop that command off the wire.
Thanks for the pointer!
Nick
On Sun, 12 Nov 2000, James FitzGibbon wrote:
> * Nick Hibma ([EMAIL PROTECTED]) [001112 06:01]:
>
> > I don't know. The only thing I know is that the protocol on the USB
> > wire does not let you select the SCSI id, just the LUN.
>
> I've confirmed that under Windows this cable works with any SCSI ID, but
> only if you install the Microtech driver. Otherwise, it doesn't show up
> (i.e. identical to FBSD). Presuming that their driver is actually just a
> ID mapping layer, would the same thing be feasible under BSD?
>
> I'll fire off a note to their support people and see if they can at least
> confirm my line of thinking here.
>
> --
> j.
>
> James FitzGibbon [EMAIL PROTECTED]
> Targetnet.com Inc. Voice/Fax +1 416 306-0466/0452
>
--
Qube Software, Ltd. Private:
[EMAIL PROTECTED] [EMAIL PROTECTED]
[EMAIL PROTECTED]
http://www.qubesoft.com/ http://www.etla.net/~n_hibma/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message