Yeah I noticed that apperently im on prety bad crack, Ill fix it.
On Tue, 27 Mar 2001, Paul Saab wrote:
> This does not include the write combined crashdump code. Please update
> your sources and you will see this change isn't necessary.
>
> paul
>
> Gersh ([EMAIL PROTECTED]) wrote:
> > Ive writen a quick patch for dev/ata/ata-disk.c:addump under
> > 4.0-stable (03/26/01) which is considerbally faster.
> >
> > I did dumps on a SMP system with 512 megs of ram.
> >
> > Old: 201 seconds.
> > New: 59 seconds.
> >
> > What I could gather from talking to people over irc/email about the
> > problem was that there was a DELAY(1000) in between each printf
> > to deal with problems with serial connections to the debugger. The
> > soultion I came up with simply to display a smaller ammount of printf's
> > the output looks like this:
> >
> > Dump in progress, percentage complete: 10 20 30 40 50 60 70 80 100. Done.
> >
> > The dump_stats() routine probally belongs in some kern/subr_whatever.c
> > and should probally be used in the other dump routines for da/ide etc.
> >
> > Any thoughts or comments ?
>
> > --- ata-disk.c.orig Tue Mar 27 10:31:59 2001
> > +++ ata-disk.c Tue Mar 27 14:39:24 2001
> > @@ -91,6 +91,7 @@
> > static struct cdevsw fakewddisk_cdevsw;
> >
> > /* prototypes */
> > +int dump_stats(int, int, int *);
> > static void ad_timeout(struct ad_request *);
> > static int32_t ad_version(u_int16_t);
> >
> > @@ -259,7 +260,7 @@
> > struct ad_request request;
> > u_int count, blkno, secsize;
> > vm_offset_t addr = 0;
> > - int error;
> > + int error, left, state, total, percent;
> >
> > if ((error = disk_dumpcheck(dev, &count, &blkno, &secsize)))
> > return error;
> > @@ -271,8 +272,12 @@
> > adp->controller->mode[ATA_DEV(adp->unit)] = ATA_PIO;
> > ata_reinit(adp->controller);
> >
> > + state = left = 0;
> > + total = (count * DEV_BSIZE) / (1024 * 1024);
> > +
> > + printf("Dump in progress, percentage complete: ");
> > +
> > while (count > 0) {
> > - DELAY(1000);
> > if (is_physical_memory(addr))
> > pmap_enter(kernel_pmap, (vm_offset_t)CADDR1,
> > trunc_page(addr), VM_PROT_READ, TRUE);
> > @@ -300,9 +305,17 @@
> > if (wdog_tickler)
> > (*wdog_tickler)();
> > #endif
> > - printf("%ld ", (long)(count * DEV_BSIZE) / (1024 * 1024));
> > - }
> > + left++;
> > + percent = left * 100 / total;
> >
> > + /*
> > + * Rate limit printf's to replace old DELAY(1000)
> > + * This is done so that old slow serial connections
> > + * do not get hosed.
> > + */
> > +
> > + dump_stats(percent, total, &state);
> > + }
> > blkno += howmany(PAGE_SIZE, secsize);
> > count -= howmany(PAGE_SIZE, secsize);
> > addr += PAGE_SIZE;
> > @@ -619,4 +632,96 @@
> > if (version & (1<<bit))
> > return bit;
> > return 0;
> > +}
> > +
> > +int
> > +dump_stats(count, total, state)
> > + int count;
> > + int total;
> > + int *state;
> > +{
> > + switch (*state)
> > + {
> > + case 0:
> > + if (count > 10)
> > + *state = 10;
> > + break;
> > +
> > + case 10:
> > + if (count > 20)
> > + {
> > + printf("%d ", *state);
> > + *state = 20;
> > + }
> > + break;
> > +
> > + case 20:
> > + if (count > 30)
> > + {
> > + printf("%d ", *state);
> > + *state = 30;
> > + }
> > + break;
> > +
> > + case 30:
> > + if (count > 40)
> > + {
> > + printf("%d ", *state);
> > + *state = 40;
> > + }
> > + break;
> > +
> > + case 40:
> > + if (count > 50)
> > + {
> > + printf("%d ", *state);
> > + *state = 50;
> > + }
> > + break;
> > +
> > + case 50:
> > + if (count > 60)
> > + {
> > + printf("%d ", *state);
> > + *state = 60;
> > + }
> > + break;
> > +
> > + case 60:
> > + if (count > 70)
> > + {
> > + printf("%d ", *state);
> > + *state = 70;
> > + }
> > + break;
> > +
> > + case 70:
> > + if (count > 80)
> > + {
> > + printf("%d ", *state);
> > + *state = 80;
> > + }
> > + break;
> > +
> > + case 80:
> > + if (count > 90)
> > + {
> > + printf("%d ", *state);
> > + *state = 90;
> > + }
> > + break;
> > +
> > + case 90:
> > + if (count == 100)
> > + {
> > + *state = 100;
> > + printf("%d. Done", *state);
> > + }
> > + break;
> > +
> > + default:
> > + break;
> > + }
> > +
> > + return 0;
> > }
>
>
> --
> Paul Saab
> Technical Yahoo
> [EMAIL PROTECTED] - [EMAIL PROTECTED] - [EMAIL PROTECTED]
> Do You .. uhh .. Yahoo!?
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-hackers" in the body of the message
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
