I didn't resolved my problem.
Even after upgraded to 4.4-stable (because there was maybe a bug in snmpd
:-p).
I don't know what I could do.
----- Original Message -----
From: "Chojin" <[EMAIL PROTECTED]>
To: "Joe Clarke" <[EMAIL PROTECTED]>
Cc: "Jean-Francois Dive" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Wednesday, September 12, 2001 9:30 PM
Subject: Re: Problem with snmpd
> I tried your snmpd.conf but with no success :'(
> ----- Original Message -----
> From: "Joe Clarke" <[EMAIL PROTECTED]>
> To: "Chojin" <[EMAIL PROTECTED]>
> Cc: "Jean-Francois Dive" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> Sent: Wednesday, September 12, 2001 8:34 PM
> Subject: Re: Problem with snmpd
>
>
> > Can you send your snmp.conf file? These are the relevant bits of mine:
> >
> > com2sec local localhost public
> > com2sec localrw localhost private
> > com2sec mynetwork 172.18.0.0/24 public
> > com2sec mynetworkrw 172.18.0.0/24 private
> >
> > ####
> > # Second, map the security names into group names:
> >
> > # sec.model sec.name
> > group LocalRWGroup v1 localrw
> > group LocalRWGroup v2c localrw
> > group LocalRWGroup usm localrw
> > group LocalROGroup v1 local
> > group LocalROGroup v2c local
> > group LocalROGroup usm local
> > group NetROGroup v1 mynetwork
> > group NetROGroup v2c mynetwork
> > group NetROGroup usm mynetwork
> > group NetRWGroup v1 mynetworkrw
> > group NetRWGroup v2c mynetworkrw
> > group NetRWGroup usm mynetworkrw
> >
> > ####
> > # Third, create a view for us to let the groups have rights to:
> >
> > # incl/excl subtree mask
> > view all included .1 80
> >
> > ####
> > # Finally, grant the 2 groups access to the 1 view with different
> > # write permissions:
> >
> > # context sec.model sec.level match read write notif
> > access LocalROGroup "" any noauth exact all none
none
> > access LocalRWGroup "" any noauth exact all all
none
> > access NetROGroup "" any noauth exact all none
none
> > access NetRWGroup "" any noauth exact all all
none
> >
> >
> > public@localhost does work on my machine.
> >
> > Joe
> >
> > On Wed, 12 Sep 2001, Chojin wrote:
> >
> > > I used TMRTGCHO as community name before, but since I've got this
> problem I
> > > use now public.
> > > Request from localhost or any other interface doesn't work.
> > > I cleaned snmpd.log, restarted snmpd:
> > > #/usr/local/sbin/snmpd -D -c /usr/local/share/snmp/snmpd.conf -l
> > > /var/log/snmpd.log
> > >
> > > and a new one is located at http://www.tarakan-network.com/snmpd.log
(I
> did
> > > a snmpwalk and snmpget for public@localhost but no success)
> > >
> > > ----- Original Message -----
> > > From: "Jean-Francois Dive" <[EMAIL PROTECTED]>
> > > To: "Chojin" <[EMAIL PROTECTED]>
> > > Sent: Wednesday, September 12, 2001 10:38 AM
> > > Subject: Re: Problem with snmpd
> > >
> > >
> > > > Hi (salut)
> > > >
> > > > In fact, i see some successfull request with the community:
> > > > TMRTGCHO and no attemps with the localhost one... seems pretty odd.
> did
> > > > you only got those requests from localhost not working ?
> > > >
> > > > Otherwise, purge the log file, be *sure* that no requests are
comming
> from
> > > > somewhere else and resart to see some failures...
> > > >
> > > > JeF
> > > >
> > > > On Wed, 12 Sep 2001, Chojin wrote:
> > > >
> > > > > I launched in debug mode
> > > > > #/usr/local/sbin/snmpd -D -c /usr/local/share/snmp/snmpd.conf -l
> > > > > /var/log/snmpd.log
> > > > > I attached snmpd.log
> > > > > There are so many informations I can't detect the problem :pp
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Jean-Francois Dive" <[EMAIL PROTECTED]>
> > > > > To: "Chojin" <[EMAIL PROTECTED]>
> > > > > Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
> > > > > Sent: Wednesday, September 12, 2001 9:53 AM
> > > > > Subject: Re: Problem with snmpd
> > > > >
> > > > >
> > > > > > i think it is possible to start the snmpd and not send it to
> > > backgroud,
> > > > > > and see if it does printout some error messages..Otherwise use
the
> > > truss
> > > > > > command to follow the syscalls made by the daemon while
processing
> > > your
> > > > > > request, this could point you to a problem..
> > > > > >
> > > > > > JeF
> > > > > >
> > > > > > On Wed, 12 Sep 2001, Chojin wrote:
> > > > > >
> > > > > > > snmpd.log is empty...
> > > > > > >
> > > > > > > I did #netstat -an | grep 161
> > > > > > > udp4 0 0 *.161 *.*
> > > > > > >
> > > > > > > port 161 exists then it should work...
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Jean-Francois Dive" <[EMAIL PROTECTED]>
> > > > > > > To: "Chojin" <[EMAIL PROTECTED]>
> > > > > > > Cc: <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> > > > > > > Sent: Wednesday, September 12, 2001 3:21 AM
> > > > > > > Subject: Re: Problem with snmpd
> > > > > > >
> > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > So you have any traces in a log file or something similar ?
> > > > > > > >
> > > > > > > > JeF
> > > > > > > >
> > > > > > > > On Tue, 11 Sep 2001, Chojin wrote:
> > > > > > > >
> > > > > > > > > Hello,
> > > > > > > > >
> > > > > > > > > I have a problem with snmpd.
> > > > > > > > >
> > > > > > > > > In fact, one day, for unknown reason ( I didn't modify any
> > > > > setting ),
> > > > > > > snmpd
> > > > > > > > > didn't work anymore:
> > > > > > > > > When I do a snmpwalk or snmpget to public@localhost it
> doesn't
> > > > > respond.
> > > > > > > > > I checked snmpd, recreated snmpd.conf and launched again
> snmpd
> > > > > with -c
> > > > > > > > > and -l to be sure it uses the correct files.
> > > > > > > > > But even if snmpd is in background process,
> public@localhost
> > > > > doesn't
> > > > > > > work.
> > > > > > > > > I don't have any firewall rule that block it.
> > > > > > > > >
> > > > > > > > > #snmpwalk localhost public
> > > > > > > > > Timeout: No Response from localhost
> > > > > > > > > #snmpget localhost public SysName
> > > > > > > > > Timeout: No Response from localhost.
> > > > > > > > >
> > > > > > > > > After I upgraded my system from 4.3-STABLE to 4.4-RC, it
> didn't
> > > > > change
> > > > > > > > > anything for snmpd.
> > > > > > > > >
> > > > > > > > > If someone has got any idea...
> > > > > > > > >
> > > > > > > > > Best regards,
> > > > > > > > >
> > > > > > > > > Chojin
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > > > > > > > > with "unsubscribe freebsd-hackers" in the body of the
> message
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > >
> > > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > > with "unsubscribe freebsd-questions" in the body of the message
> > >
> > >
> >
> >
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-questions" in the body of the message
> >
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-questions" in the body of the message
>
snmpd.conf
