Hello all, I'm trying to make my sound card work on a compaq 1700 laptop with FreeBSD 4.5-RELEASE. AFAIK and from advice from people in this list my sound card uses the maestro3 module. I add the following lines to my kernel configuration.
device pcm0 at isa? irq 10 drq 1 flags 0x0 # for non-PnP sound cards device pcm # for PnP/PCI sound cards I was following the instruction of the driver in this page http://www.cs.duke.edu/~anderson/freebsd/maestro3xxx/ I know that the maestro3 module is already build in, but checking out the source files from the webpage and my computer that I see that I do not have the following /usr/src/sys/dev/sound/pci/maestro3_dsp.h the other files are maestro3.c maestro3_reg.h So i thought it will be better to make the module again. But before all this maestro thing I recompile my kernel with the pcm lines that I already gave you, and I got this error in the dmesg after recompiling the kernel and rebooting. pcm0: <Intel 82801CA (ICH3)> irq 5 at device 31.5 on pci0 pcm0: unable to map IO port space device_probe_and_attach: pcm0 attach returned 6 I'm kind of lost right now. What could be the problem. In windoze, my sound card appear as a SoundMax Integrated Digital Audio with the following Interrupt Request 05 Input/Output Range 1400 - 14FF Input/Output Range 1080 - 10BF I'm only subscribe to the freebsd-questions list. I'll apreciate you help thanks Gerardo Amaya _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-hackers" in the body of the message