I'm looking for a 5 volt signal. I have wires plugged into pins 2 and 25 of the parallel port.
I have written a small program: #include <stdio.h> #include <dev/ppbus/ppi.h> #include <dev/ppbus/ppbconf.h> int main() { int fd; while(1) { ioctl(fd, PPISDATA, 255); } } and have it executing... I have a multi-meter with the positive lead touching the pin 2 wire and the negative lead touching pin 25 wire, but i am not registering any voltage. =( I am sad. I have recompiled my kernel to disable plip and enable ppi. The following is a snipet of my kernel configuration: # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer # # 2002 oct 27 - removed plip and added ppi. # #device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da any help would be very much appreciated To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-hackers" in the body of the message