This particular card is a controllerless modem (ie. it is a winmodem), and has no UART.
Seeya...Q On Fri, 2004-01-09 at 21:33, Cristiano Deana wrote: > Sorry for my basic knownledge about freebsd hacking and english language. > > Problem: i need to use an internal PCI modem, 56k. > I found USR (NO winmodem) pci 56k but it were not right detect by freebsd. > > test# uname -rs > FreeBSD 5.2-RC1 > > I add all his id in: > src/sys/dev/puc/pucdata.c > src/sys/dev/sio/sio_pci.c > src/sys/dev/uart/uart_bus_pci.c > copying and modifing existing similar USR modem pci. > > Now it's detect as: > [EMAIL PROTECTED]:20:0: class=0x078000 card=0x00c412b9 chip=0x100712b9 rev=0x00 > hdr=0x00 > vendor = '3COM Corp, Modem Division (Formerly US Robotics)' > device = 'ERL3263A-0 USR 56k Internal DF GWPCI PC99' > class = simple comms > > It has not a subclass UART, so i have not a cuaa*. > > Any ideas? > > Verbose dmesg: > http://moto.bmm.it/dmesg > > Thanks _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"