use the following patch instead of earlier one. earlier patch hardcoded
use of HomePNA PHY and disabled Ethernet PHY. this patch corrects this
behaviour and allows switching between either PHY thru use of the ifconfig
command. this means that the USB dongle can either be used as an Ethernet
device (connect to switch/hub) or as a HomePNA access device, but not both
simultaneously.
ifconfig aue0 media homepna # activates HomePNA PHY/RJ11
ifconfig aue0 media auto # activates Ethernet PHY/RJ45
using auto as media type is synonymous with the following media types:
10baseT 10baseT-FDX 100baseTX 100baseTX-FDX
much apologies for not checking things correctly before submitting the
patch.
patch follows:
------- CUT HERE -------
--- if_aue.c.org Wed Jan 7 20:02:51 2004
+++ if_aue.c Thu Jan 8 21:12:23 2004
@@ -118,7 +118,7 @@
{ USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_USB320_EC, 0 },
{ USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_SS1001, PII },
{ USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUS, PNA },
- { USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUSII, PII },
+ { USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUSII, PNA|PII },
{ USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_USB2LAN, PII },
{ USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USB100, 0 },
{ USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USBLP100, PNA },
@@ -492,6 +492,17 @@
mii = device_get_softc(sc->aue_miibus);
AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB|AUE_CTL0_TX_ENB);
+
+ if (IFM_SUBTYPE(mii->mii_media_active) == IFM_homePNA) {
+ if (sc->aue_info->aue_flags & (PNA|PII)) {
+ csr_write_1(sc, AUE_GPIO1, 0x34);
+ csr_write_1(sc, AUE_REG_81, 6);
+ }
+ } else {
+ csr_write_1(sc, AUE_GPIO1, 0x26);
+ csr_write_1(sc, AUE_REG_81, 2);
+ }
+
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
} else {
@@ -576,12 +587,10 @@
/* Magic constants taken from Linux driver. */
csr_write_1(sc, AUE_REG_1D, 0);
csr_write_1(sc, AUE_REG_7B, 2);
-#if 0
- if ((sc->aue_flags & HAS_HOME_PNA) && mii_mode)
- csr_write_1(sc, AUE_REG_81, 6);
- else
-#endif
+
+ if (sc->aue_info->aue_flags & PNA) {
csr_write_1(sc, AUE_REG_81, 2);
+ }
}
Static void
------- CUT HERE -------
--dinesh
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
