Following is the output of pciconf -lv command:
[EMAIL PROTECTED]:0:0: class=0x060000 card=0x00000000 chip=0x00171166 rev=0x32 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CMIC-SL'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:0:1: class=0x060000 card=0x00000000 chip=0x00171166 rev=0x00 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CMIC-SL'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:4:0: class=0x020000 card=0x9207103c chip=0x12111113 rev=0x10 hdr=0x00
vendor = 'Accton Technology Corporation'
device = 'EN-1207D Fast Ethernet Adapter'
class = network
subclass = ethernet
[EMAIL PROTECTED]:14:0: class=0x030000 card=0x01351028 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies'
device = 'Rage XL PCI'
class = display
subclass = VGA
[EMAIL PROTECTED]:15:0: class=0x060000 card=0x02011166 chip=0x02011166 rev=0x93 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CSB5 PCI to ISA Bridge'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:15:1: class=0x01018a card=0xc1351028 chip=0x02121166 rev=0x93 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CSB5 PCI EIDE Controller'
class = mass storage
subclass = ATA
[EMAIL PROTECTED]:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x05 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OSB4 OpenHCI Compliant USB Controller'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:15:3: class=0x060100 card=0x02301166 chip=0x02251166 rev=0x00 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CSB5 PCI Bridge'
class = bridge
subclass = PCI-ISA
[EMAIL PROTECTED]:16:0: class=0x060000 card=0x00000000 chip=0x01011166 rev=0x05 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CIOB-X2'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:16:2: class=0x060000 card=0x00000000 chip=0x01011166 rev=0x05 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'CIOB-X2'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:4:0: class=0x010000 card=0x01351028 chip=0x00301000 rev=0x07 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
Ganbold
At 06:22 PM 16.02.2004, you wrote:
On Mon, 16 Feb 2004, Ganbold wrote:
> Hi, > > I installed FreeBSD 5.2 and updated using cvsup on Dell Poweredge 1600SC. > However still FreeBSD doesn't recognize network card. It has onboard Intel > Pro/1000 MT card. > What should I do in order to use this onboard Intel PRO/1000 card? I > checked Intel web site and found only > em driver for FreeBSD 4.7. > Where can I find latest driver for Intel PRO/1000 MT network card? > > tia, > > Ganbold
The driver in 5.2 should support that card. Can you post the results of a "pciconf -lv" so we can see the PCI ID of your specific card?
Thanks,
Mike "Silby" Silbersack
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
