Ouch, not only a cardinal sin, but since V-Webmail decided to spontaneously
drop my attachment, a repost, too! I must be going straight downstairs when I
die! If for some reason it doesn't come through this time, I'm putting the
dmesg output online at
http://unlateral.dyndns.org/personal/freebsd/dmesg.verbose.livecd.txt
--
Alan Gerber
I'm gonna commit the cardinal sin and cross-post this to -hackers since I
haven't had any luck getting an answer out of -questions. ;-)
I hope someone here's at least partly seen this before!
--
Alan Gerber
Hey all,
I'm trying to put 5.2.1-Release on my desktop at home, and I'm experiencing a
couple of errors that have me confused. First, I get a number of
"module_register: module ???/??? already exists!\nModule ???/??? failed to
register: 17" errors on startup (I'm including the dmesg output which includes
these errors), and I also get a watchdog timeout for all of the 4 different
network cards I've used in the machine. The specific watchdog message isn't
included in the dmesg text, but it's none to complicated: "rl0: watchdog
timeout" and such. The NICS that I've used are:
2x Linksys LNE100TX v4 (dc driver)
1x Generic Belkin card (rl driver)
1x Intel Pro/100 (fxp driver)
My guess is that these two problems are probably related, but since I've no
idea how to resolve the first problem, I started troubleshooting the second:
here's what I've found so far:
I've read enough of the man pages to know that this is supposedly caused by
the driver not getting a response that a packet was put on the wire
successfully. But I am certain that the cards are good (I've pulled all but
the 1st Linksys out of working machines to test this), and the cabling and
connections are all good, too. I've used the same cards successfully in WinXP
with no problems whatsoever on the same machine.
I am experiencing this error with the install floppies, install CD, liveCD,
and even after installation via CD with the generic kernel.
Disabling ACPI has had no effect in this case.
I've pulled all other cards (save my video card [GeForce FX5600]) out of the
machine and tried each of the above cards, but still no luck.
The motherboard for the machine in question is an Asus A7A266, running BIOS
revision 1011. I'm attaching the verbose ACPI-enabled dmesg output from the
liveCD in case it helps.
At this point I don't know what to do. I've checked the mail archives, FAQ,
bsdforums.org, etc, and I haven't found any situations that seem to apply for
me. I'm guessing that it is something about my specific hardware combination
or possibly a BIOS setting, but I thought I'd check here to see if anyone had
any thoughts on either a solution or a workaround.
I'd appreciate any help that can be given on this situation, because I'd love
to move away from running WinXP on my desktop! ;-)
--
Alan Gerber
0 11 12
slot 5 0 13 B 0x01 3 4 5 7 9 10 11 12
slot 5 0 13 C 0x02 3 4 5 7 9 10 11 12
slot 5 0 13 D 0x03 3 4 5 7 9 10 11 12
embedded 0 6 A 0x05 3 4 5 7 9 10 11 12
embedded 0 6 D 0x01 3 4 5 7 9 10 11 12
embedded 0 2 A 0x59 3 4 5 7 9 10 11 12
embedded 0 2 D 0x01 3 4 5 7 9 10 11 12
slot 6 1 0 A 0x01 3 4 5 7 9 10 11 12
slot 6 1 0 B 0x02 3 4 5 7 9 10 11 12
slot 6 1 0 D 0x01 3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.3
\\_SB_.LNKH irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.3
\\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.8.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.8.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.3
\\_SB_.LNKI irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.3
---- before setting priority for links ------------
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 5
priority: 0
\\_SB_.LNKH:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 1
priority: 0
\\_SB_.LNKG:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 1
priority: 0
\\_SB_.LNKB:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 4
priority: 0
\\_SB_.LNKC:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 4
priority: 0
\\_SB_.LNKD:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 4
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.LNKF:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 5
priority: 22313
\\_SB_.LNKB:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 4
priority: 17850
\\_SB_.LNKC:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 4
priority: 17850
\\_SB_.LNKD:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 4
priority: 17850
\\_SB_.LNKH:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 1
priority: 4462
\\_SB_.LNKG:
interrupts: 3 4 5 6 7 9 10 11 12 14
15
penalty: 3090 3090 2090 3090 3090 2290 2090 2990 3090 12090
12090
references: 1
priority: 4462
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.5.3
\\_SB_.LNKH irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.3.3
\\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.8.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.8.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.LNKF irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.1
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.2
\\_SB_.LNKC irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.3
\\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.3
\\_SB_.LNKI irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x10b9, dev=0x1647, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0xa210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x5247, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0017, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base cc800000, size 12, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKI)
pcib0: slot 2 INTA is routed to irq 9
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000d400, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc4
bus=0, slot=4, func=0
class=01-01-fa, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base cb800000, size 12, enabled
pcib0: matched entry for 0.6.INTA (source \\_SB_.LNKE)
pcib0: slot 6 INTA is routed to irq 9
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=6, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x1533, revid=0x00
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x000f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base ca800000, size 12, memory disabled
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=0, slot=9, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0014, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ca000000, size 12, memory disabled
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=0, slot=9, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0014, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c9800000, size 8, memory disabled
found-> vendor=0x1033, dev=0x00e0, revid=0x02
bus=0, slot=9, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0014, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000b800, size 5, port disabled
found-> vendor=0x1102, dev=0x0002, revid=0x08
bus=0, slot=10, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0004, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000b400, size 3, port disabled
found-> vendor=0x1102, dev=0x7002, revid=0x08
bus=0, slot=10, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0004, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000b000, size 8, port disabled
map[14]: type 1, range 32, base c9000000, size 10, memory disabled
found-> vendor=0x1317, dev=0x0985, revid=0x11
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0014, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base cf000000, size 12, memory disabled
found-> vendor=0x109e, dev=0x036e, revid=0x11
bus=0, slot=13, func=0
class=04-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0004, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base ce800000, size 12, memory disabled
found-> vendor=0x109e, dev=0x0878, revid=0x11
bus=0, slot=13, func=1
class=04-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0004, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xcd000000-0xce7fffff
pcib1: prefetched decode 0xcff00000-0xdfffffff
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0
\\_SB_.LNKB irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.3
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base cd000000, size 24, enabled
map[14]: type 3, range 32, base d0000000, size 28, enabled
pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA)
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x10de, dev=0x0312, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xcc800000-0xcc800fff irq 9 at
device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.10, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0xd400-0xd40f at device 4.0 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=10 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xcb800000-0xcb800fff irq 9 at
device 6.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ohci2: <NEC uPD 9210 USB controller> mem 0xca800000-0xca800fff at device 9.0 on pci0
pcib0: matched entry for 0.9.INTA (source \\_SB_.LNKD)
pcib0: slot 9 INTA is routed to irq 5
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
uhub3: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
uhub3: 4 ports with 4 removable, self powered
ohci3: <NEC uPD 9210 USB controller> mem 0xca000000-0xca000fff at device 9.1 on pci0
pcib0: matched entry for 0.9.INTB (source \\_SB_.LNKF)
pcib0: slot 9 INTB is routed to irq 10
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci3
usb3: USB revision 1.0
uhub4: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
umass0: vendor 0x07d0 USBHS MultiSlot Reader, rev 2.00/1.19, addr 2
umass0:0:0:-1: Attached to scbus0
pci0: <serial bus, USB> at device 9.2 (no driver attached)
pci0: <multimedia, audio> at device 10.0 (no driver attached)
pci0: <input device> at device 10.1 (no driver attached)
dc0: <ADMtek AN985 10/100BaseTX> port 0xb000-0xb0ff mem 0xc9000000-0xc90003ff at
device 11.0 on pci0
pcib0: matched entry for 0.11.INTA (source \\_SB_.LNKB)
pcib0: slot 11 INTA is routed to irq 5
dc0: Ethernet address: 00:04:5a:54:11:22
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000895, model 0x0001, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
pci0: <multimedia, video> at device 13.0 (no driver attached)
pci0: <multimedia> at device 13.1 (no driver attached)
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
unknown: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: irq maps: 0x401 0x411 0x401 0x401
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x401 0x409 0x401 0x401
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xd0000-0xd3fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1424668318 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09e16d8
GEOM: Configure md0a, start 0 length 4423680 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA100 on AcerLabs Aladdin chip
ata0-slave: setting PIO4 on AcerLabs Aladdin chip
ata0-slave: setting UDMA100 on AcerLabs Aladdin chip
GEOM: create disk ad0 dp=0xc6637960
ad0: <WDC WD400BB-75AUA1/18.20D18> ATA-5 disk at ata0-master
ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:25173792
[1] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/254/63 s:25173855 l:16579080
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:41752935 l:36403290
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 12888981504 end 12889013759
GEOM: Configure ad0s2, start 12889013760 length 8488488960 end 21377502719
GEOM: Configure ad0s3, start 21377502720 length 18638484480 end 40015987199
GEOM: create disk ad1 dp=0xc6637760
ad1: <WDC WD1200BB-00DAA0/65.13G65> ATA-6 disk at ata0-slave
ad1: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ar: FreeBSD check1 failed
ata1: spurious interrupt - status=0x50 error=0x00
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on AcerLabs Aladdin chip
ata1-slave: setting PIO4 on AcerLabs Aladdin chip
acd0: <ASUS CRW-5224A/1.0> CDRW drive at ata1 as master
acd0: read 2756KB/s (8958KB/s) write 8958KB/s (8958KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
acd1: <DVD-ROM BDV316C/VER .20R> DVDROM drive at ata1 as slave
acd1: 512KB buffer, PIO4
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd1: Writes:
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s3b, start 268435456 length 1584144384 end 1852579839
GEOM: Configure ad0s3c, start 0 length 18638484480 end 18638484479
GEOM: Configure ad0s3d, start 1852579840 length 268435456 end 2121015295
GEOM: Configure ad0s3e, start 2121015296 length 268435456 end 2389450751
GEOM: Configure ad0s3f, start 2389450752 length 16249033728 end 18638484479
GEOM: new disk ad1
[0] f:00 typ:66 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:234436482
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 120031478784 end 120031511039
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): Retrying Command
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
(probe0:umass-sim0:0:0:0): Request completed with CAM_REQ_CMP_ERR
(probe0:umass-sim0:0:0:0): error 5
(probe0:umass-sim0:0:0:0): Retries Exausted
Mounting root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
module_register: module pci/txp already exists!
Module pci/txp failed to register: 17
interface cd9660.1 already present in the KLD 'kernel'!
interface sysvmsg.1 already present in the KLD 'kernel'!
module_register: module pccard/xe already exists!
Module pccard/xe failed to register: 17
module_register: module pci/pcn already exists!
Module pci/pcn failed to register: 17
module_register: module pcn/miibus already exists!
Module pcn/miibus failed to register: 17
module_register: module pci/vr already exists!
Module pci/vr failed to register: 17
module_register: module vr/miibus already exists!
Module vr/miibus failed to register: 17
module_register: module pci/ste already exists!
Module pci/ste failed to register: 17
module_register: module ste/miibus already exists!
Module ste/miibus failed to register: 17
module_register: module if_tun already exists!
Module if_tun failed to register: 17
can't re-use a leaf (if_tun_debug)!
module_register: module uhub/cue already exists!
Module uhub/cue failed to register: 17
module_register: module cardbus/xl already exists!
Module cardbus/xl failed to register: 17
module_register: module pci/xl already exists!
Module pci/xl failed to register: 17
module_register: module xl/miibus already exists!
Module xl/miibus failed to register: 17
module_register: module pccard/ed already exists!
Module pccard/ed failed to register: 17
module_register: module ed/miibus already exists!
Module ed/miibus failed to register: 17
module_register: module pci/ed already exists!
Module pci/ed failed to register: 17
module_register: module isa/ed already exists!
Module isa/ed failed to register: 17
ppc0: parallel port not found.
module_register: module pci/bge already exists!
Module pci/bge failed to register: 17
module_register: module bge/miibus already exists!
Module bge/miibus failed to register: 17
module_register: module pci/re already exists!
Module pci/re failed to register: 17
module_register: module cardbus/re already exists!
Module cardbus/re failed to register: 17
module_register: module re/miibus already exists!
Module re/miibus failed to register: 17
module_register: module pci/wb already exists!
Module pci/wb failed to register: 17
module_register: module wb/miibus already exists!
Module wb/miibus failed to register: 17
module_register: module pci/rl already exists!
Module pci/rl failed to register: 17
module_register: module cardbus/rl already exists!
Module cardbus/rl failed to register: 17
module_register: module rl/miibus already exists!
Module rl/miibus failed to register: 17
module_register: module pci/sis already exists!
Module pci/sis failed to register: 17
module_register: module sis/miibus already exists!
Module sis/miibus failed to register: 17
module_register: module cardbus/dc already exists!
Module cardbus/dc failed to register: 17
module_register: module pci/dc already exists!
Module pci/dc failed to register: 17
module_register: module dc/miibus already exists!
Module dc/miibus failed to register: 17
can't re-use a leaf (dc_quick)!
interface sysvshm.1 already present in the KLD 'kernel'!
module_register: module pci/bfe already exists!
Module pci/bfe failed to register: 17
module_register: module bfe/miibus already exists!
Module bfe/miibus failed to register: 17
module_register: module uhub/aue already exists!
Module uhub/aue failed to register: 17
module_register: module aue/miibus already exists!
Module aue/miibus failed to register: 17
interface miibus.1 already present in the KLD 'kernel'!
module_register: module pci/lnc already exists!
Module pci/lnc failed to register: 17
module_register: module isa/lnc already exists!
Module isa/lnc failed to register: 17
ppc0: parallel port not found.
interface sysvsem.1 already present in the KLD 'kernel'!
module_register: module pccard/fe already exists!
Module pccard/fe failed to register: 17
module_register: module isa/fe already exists!
Module isa/fe failed to register: 17
ppc0: parallel port not found.
module_register: module pci/fxp already exists!
Module pci/fxp failed to register: 17
module_register: module cardbus/fxp already exists!
Module cardbus/fxp failed to register: 17
module_register: module fxp/miibus already exists!
Module fxp/miibus failed to register: 17
can't re-use a leaf (fxp_rnr)!
can't re-use a leaf (fxp_noflow)!
module_register: module uhub/kue already exists!
Module uhub/kue failed to register: 17
module_register: module pci/sf already exists!
Module pci/sf failed to register: 17
module_register: module sf/miibus already exists!
Module sf/miibus failed to register: 17
fd0: autoselection failed
fd0: autoselection failed
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
