You might want /usr/ports/sysutils/scan_ffs
from the package description:
scan_ffs(8) recovers accidential lost or deleted disklabels.
...
This little program will take a raw disk device (which you might have to
create) that covers the whole disk, and finds all probable UFS/FFS parti-
tions on the disk. It has various options to make it go faster, and to
print out information to help in the reconstruction of the disklabel.
I have used this to rebuild slice/partition tables.
Run scan_ffs on the raw disk. It will find the superblocks and print
the start and length of the each FS from the superblocks. You might
have to offset the numbers based on the start of the old slice as the values
will probably be referenced to raw disk block 0, not the old slice
block 0.
Good luck!
Joe Koberg
joe at osoft dot us
Andreas Klemm wrote:
I unluckily lost the partition table of my 1st disc in a 2 disc system.
Tip: avoid gag boot manager and don't do my mistakes ...
Having a printout of the df command I was able to re-create all of
my fat32 partitions on disc XP boot and 4x FAT32 in an extended part.
Now I'm looking for suggestions how to be able to compute the
correct values for Slice 3 and 4 which I could not recover so far.
It irritates me a bit, that the slices 1+2 already work so well,
so theoretically mounting of at least slice 3 should be possible now.
Or are there some sanity checks in the kernel that only allows
creating the devices in devfs if the size entries in the disklabel
and the entry in the partition table of the MBR fit both ??
Maybe I'm only off-by 1 or 2 cylinders in the partition table.
Do you know a tool or a method how I can compute/find the start cylinder
of FreeBSD partitions ?
Perhaps Im already at the right start cylinder and now only have
to de-chiffre the entries of the BSD disklabel, which should be
in the 1st sector of sector 312581808 ???
This I was able to restore, which works well.
Disk name: ad4 FDISK Partition Editor
DISK Geometry: 19457 cyls/255 heads/63 sectors = 312576705 sectors (152625MB)
Offset Size(ST) End Name PType Desc Subtype Flags
0 63 62 - 12 unused 0
63 24579387 24579449 ad4s1 7 fat 11
24579450 174080340 198659789 ad4s2 4 extended DOS 5
198659790 113922018 312581807 - 12 unused 0
I only had this data available to compute the rest...
Filesystem 1k-blocks Used Avail Capacity Mounted on
/dev/ad4s3d 8119448 4 7469890 0% /test
/dev/ad4s4d 46026106 24134198 18209820 57% /data
This resulted in that partitioning, which unluckily doesnt work.
Disk name: ad4 FDISK Partition Editor
DISK Geometry: 19457 cyls/255 heads/63 sectors = 312576705 sectors (152625MB)
Offset Size(ST) End Name PType Desc Subtype Flags
0 63 62 - 12 unused 0
63 24579387 24579449 ad4s1 7 fat 11
24579450 174080340 198659789 ad4s2 4 extended DOS 5
198659790 17077095 215736884 ad4s3 8 freebsd 165
215736885 96839820 312576704 ad4s4 8 freebsd 165
312576705 5103 312581807 - 12 unused 0
In devfs I only see the devices
rw-r----- 1 root operator 4, 17 11 Sep 09:56 ad4s3
crw-r----- 1 root operator 4, 27 11 Sep 09:56 ad4s3c
crw-r----- 1 root operator 4, 18 11 Sep 09:56 ad4s4
crw-r----- 1 root operator 4, 28 11 Sep 09:56 ad4s4c
But not ad4s3d and ad4s4d which would indicate I got the
partition table entries for Slice 3+4 right.
Andreas ///
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"