In our initial posts, we stated that we seemed to be having issues getting the machine to boot with the 4 processors, so to bypass this we disabled ACPI on boot. This allowed us to get past the CPU error and continue to boot. However down the track we noticed things like the ethernet adapater not getting picked up, and the big problem - none of the disks getting recognised.
We have since tried a few things, one of which was removing all but one of the CPU's. If we do this, and boot with ACPI enabled, all is totally fine. All disks are found, and I receive no CPU panic error. So it appears to me that by disabling ACPI in an attempt to bypass the QUAD CPU problem, we are causing another issue behind the scenes. The root of the problem now appears to be, that if we have anything over 1 CPU, directly after the kernel is loaded (when booting from the CD), we receive the error message "panic: madt_probe_cpus_handler: CPU ID 38 Too High". The moment a second CPU to the machine....it bombs out. Murray Taylor Special Projects Engineer Bytecraft Systems P: +61 3 8710 2555 F: +61 3 8710 2599 D: +61 3 9238 4275 E: [EMAIL PROTECTED] -- "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." --Albert Einstein --------------------------------------------------------------- The information transmitted in this e-mail is for the exclusive use of the intended addressee and may contain confidential and/or privileged material. Any review, re-transmission, dissemination or other use of it, or the taking of any action in reliance upon this information by persons and/or entities other than the intended recipient is prohibited. If you received this in error, please inform the sender and/or addressee immediately and delete the material. E-mails may not be secure, may contain computer viruses and may be corrupted in transmission. Please carefully check this e-mail (and any attachment) accordingly. No warranties are given and no liability is accepted for any loss or damage caused by such matters. --------------------------------------------------------------- ### This e-mail message has been scanned for Viruses by Bytecraft ### _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"