Hi
i'm running freebsd stable (last build 28th) and am having a few issues
with 2 pci serial cards. Basically I'm trying to build a serial server.
However the driver doesn't seem to work correctly.
Sep 28 22:18:56 boxster puc0: <NetMos NM9845 Hex UART> port
0xce00-0xce07,0xcc00-0xcc07,0xca00-0xca07,0xc800-0xc807,0xc600-0xc607,0xc400-0xc40f
irq 9 at device 8.0 on pci0
Sep 28 22:18:56 boxster puc1: <NetMos NM9845 Hex UART> port
0xde00-0xde07,0xdc00-0xdc07,0xda00-0xda07,0xd800-0xd807,0xd600-0xd607,0xd400-0xd40f
irq 10 at device 11.0 on pci0
Sep 28 22:18:56 boxster puc1: could not get resource
they are both 6 port serial pci cards, and are listed in the puc driver
as supported. The pc is quite old so Im not sure if whats causing any
issues. I have tried the bios with pnpos enables and disabled but it
makes little difference. I have also tried with one card and the issue
is the same.
I have also disabled the pcs onboard serial ports and still no go
I have disabled ACPI with hint.acpi.0.disabled="1" this seems to stop
the resource error but I dont get any additional cuad devices
$ pciconf -l -v | grep -B 4 UART
[EMAIL PROTECTED]:8:0: class=0x070002 card=0x00061000 chip=0x98459710 rev=0x01
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
device = 'Nm9845 Parallel/Serial Port Adapter'
class = simple comms
subclass = UART
--
[EMAIL PROTECTED]:11:0: class=0x070002 card=0x00061000 chip=0x98459710 rev=0x01
hdr=0x00
vendor = 'MosChip Semiconductors (Was: Netmos Technology)'
device = 'Nm9845 Parallel/Serial Port Adapter'
class = simple comms
subclass = UART
Any help much appreciated
chris
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
