John Baldwin wrote: >> Physical Disks: >> Port Drive Model Serial # Size Type/Status(Vol ID) >> 0 WDC WD5000ABYS-0 WD-WCAPW5637184 465.8GB Member Disk(0) >> 1 ST3500320NS 5QM09E6F 465.8GB Error Occurred(0) >> 2 WDC WD5000ABYS-0 WD-WCAPW5548822 465.8GB Member Disk(1) >> 3 ST3500320NS 5QM0991D 465.8GB Member Disk(1) >> Press <CTRL-I> to enter Configuration Utility........... >> >> >> >> RELEVANT SNIPPET FROM DMESG: >> >> ar0: 476937MB <Intel MatrixRAID RAID1> status: READY >> ar0: disk0 READY (master) using ad4 at ata2-master >> ar0: disk1 READY (mirror) using ad6 at ata3-master > > Err, you have two RAID volumes, one degraded, and one ok. ar0 is apparently > the one that is ok (drives 2 and 3). What is more odd is that it isn't > seeing a RAID config at all for ad0 and ad2 (drives 0 and 1).
Nope, ar1 (with ad8 and ad10) is the second RAID, both are marked as READY even though one is degraded in the BIOS. ar0: 476937MB <Intel MatrixRAID RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 476937MB <Intel MatrixRAID RAID1> status: READY ar1: disk0 READY (master) using ad8 at ata4-master ar1: disk1 READY (mirror) using ad10 at ata5-master In any case, this is water under the bridge for me now. Cheers, Stef Walter _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
