[EMAIL PROTECTED] wrote:
I bought an ASUS motherboard with onboard SATA II controller. I
attached 2 HDs SATA II but when I run dmesg I notice that my system
sees them as normal older SATA 150 instead of SATA 300.
Is there any suggestion to solve this problem ?
Have a nice day.
------------------dmesg output-----------------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.1-RELEASE-p1 #0: Fri Jun 2 15:41:03 CEST 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/AMOS-SMP
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.38-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf62 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe43d<SSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,<b14>,<b15>>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2138701824 (2039 MB)
avail memory = 2087825408 (1991 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
atapci0: <ITE IT8211F UDMA133 controller> port
0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f
irq 19 at device 4.0 on pci1
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
atapci2: <Intel ICH7 SATA300 controller> port
0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f
irq 17 at device 31.2 on pci0
atapci2: failed to enable memory mapping!
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
acd0: DVDROM <HL-DT-STDVD-ROM GDR8163B/0L23> at ata0-master UDMA33
ad8: 114473MB <WDC WD1200JS-00MHB0 02.01C03> at ata4-master SATA150
GEOM_MIRROR: Device gm0 created (id=2415013281).
GEOM_MIRROR: Device gm0: provider ad8 detected.
ad10: 114473MB <WDC WD1200JS-00MHB0 02.01C03> at ata5-master SATA150
GEOM_MIRROR: Device gm0: provider ad10 detected.
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device gm0: provider ad10 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
GEOM_MIRROR: Device gm0: rebuilding provider ad8.
Trying to mount root from ufs:/dev/mirror/gm0s1a
em0: link state changed to UP
hello
my similar problem
motherboard with the Intel G31 Express Chipset
--------------------------------------------------------------------
|# output 'dmesg' (|partially|)
atapci1: <Intel ICH7 SATA300 controller> port
0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f
irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ad7: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata3-slave SATA150
# atacontrol cap ad7
Protocol Serial ATA II
device model WDC WD5000AAKS-00YGA0
serial number WD-WCAS87395070
firmware revision 12.01C02
cylinders 16383
heads 16
sectors/track 63
lba supported 268435455 sectors
lba48 supported 976773168 sectors
dma supported
overlap not supported
Feature Support Enable Value Vendor
write cache yes yes
read ahead yes yes
Native Command Queuing (NCQ) yes - 31/0x1F
Tagged Command Queuing (TCQ) no no 31/0x1F
SMART yes yes
microcode download yes yes
security yes no
power management yes yes
advanced power management no no 0/0x00
automatic acoustic management yes no 254/0xFE 128/0x80
# atacontrol mode ad7
current mode = SATA150
# output 'pciconf -lv' (|partially|)
[EMAIL PROTECTED]:0:31:2: class=0x01018f card=0x26391019 chip=0x27c08086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller'
class = mass storage
subclass = ATA
# uname -a
FreeBSD 7.0-STABLE FreeBSD 7.0-STABLE #5: Tue Aug 12 13:54:27 MSD 2008
root@:/usr/obj/usr/src/sys/GENERIC i386
|--------------------------------------------------------------------
please, any solution ?
/Vladimir Ermakov
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
