On 15 Apr 2010, at 17:18, Julian Elischer wrote: > On 4/15/10 3:03 AM, Mike Tancsa wrote: >> At 12:04 AM 4/15/2010, per...@pluto.rain.com wrote: >>> Mike Tancsa <m...@sentex.net> wrote: >>> >>> > I have an embedded device (Alix box) that is running RELENG_8 off >>> > a CF that is designed to monitor / control a serial sensor device. >>> > The sensor is quite chatty and is always outputing data at 115200. >>> > The problem is that this will interrupt the boot process. >>> >>> > I even tried to "fake" it out, but trying to make com2, the console >>> > in /boot/device.hints ... >>> > >>> > Is there any way to completely disable serial interaction and >>> > to truly make the bootup process quiet and non interactive ? >>> >>> More of a workaround than a fix, but does it work any better >>> if you connect the device to com2 instead of com1? >> >> >> Unfortunately there is only one serial port on the board we are using. > > yes but can the bios map it to be com2?
If not, maybe there's some way to do this by changing the hints file. Regards, -- Rui Paulo _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"