I'm having trouble with RAID1 support on the ICH6R in a Tyan S5150 motherboard. I have two identical SATA 80GB Western Digital drives put into a RAID1 array using the ICH6R setup.
I've tried both 5.4-RELEASE and 6.0-CURRENT-SNAP004 with the same results. Namely, via CD, the OS seems to load onto the mirrored SATA drives without an error; however, when attempting to boot from the resulting HDD the loader cannot find the OS and stops. If I disconnect the mirror using the ICH6R setup, the OS loads and boots correctly - at least on 6.0 - and the OS sees both drives. 1. Is the ata support (mk3 patches) now the same in 5.4 and 6.0? 2. Is hardware (ICH6R) RAID1 mirroring supported? 3. If "yes" to both, could I have corrupted the MBR? Thanks, -gayn _______________________________________________ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"