Dear freebsd people, I am trying to get a new usb mass storage device working.
But every attmpt fails as follows: root:/usr/src# dmesg | tail -6 umass0: <Samsung Electronics YP-U3, class 0/0, rev 2.00/2.20, addr 2> on uhub2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Samsung YP-U3 1.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 3855MB (7895552 512 byte sectors: 255H 63S/T 491C) (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 The problem is: elgrande:/home/elgrande/vidz# ls -d /dev/da* /dev/da0 /dev/da0s1 is not there, and so i cannot mount the drive, of course... I tried to add the device to scsi_da.c quirk list, and rbuilt the kernel. (not world cause /usb/da/atapicam is in my kernel, but i am trying this currently, to be sure). root:/usr/src# diff sys/cam/scsi/scsi_da.c sys/cam/scsi/scsi_da.c.orig 516,522d515 < * SAMSUNG YP-U3 < */ < {T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "*", "*"}, < /*quirks*/ DA_Q_NO_SYNC_CACHE < }, < { < /* Remark: I also tried {T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "YP-U3", "*"} but it made no difference. root:/usr/src# usbdevs -v | grep "port 5 addr 2" port 5 addr 2: high speed, power 500 mA, config 1, YP-U3(0x507c), Samsung Electronics(0x04e8), rev 2.20 But rebuilding and installing kernel did not work. As additional info I can give: root:/usr/src# usbdevs -v | grep "port 5 addr 2" port 5 addr 2: high speed, power 500 mA, config 1, YP-U3(0x507c), Samsung Electronics(0x04e8), rev 2.20 The device is working on several windows pc's at work, as a normal external disk drive. I would be very happy to receive help, what i can do, to get it working... (I do not have the money for another new player ;)) I really think, that I am doing something wrond with the usb quirk, because I still get the "synchronize chache failed" errors, and synchronizing is what i tried to disable... Best regards, Tino _______________________________________________ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[EMAIL PROTECTED]"